Can't change "Warning disk temperature threshold"


Recommended Posts

i have 5x "Seagate Exos X16 10TB ST10000NM001G" with "Unride 6.9.2"

disks are unassigned because i use zfs

they are hovering temperature wise between 44 and 46 C which is ideal for lots of notifications (default threshold is set for 45)

 

when i click "Dev 1" on "Dashboard" enter 48 in "Warning disk temperature threshold (°C)" and click "Apply" it work, but when i click again  "Dashboard" -> "Dev 1" "Warning disk temperature threshold (°C)" is empty (there is only placeholder 45)

 

can anybody tell me how to set "Warning disk temperature threshold"

Link to comment

when i manually edited

 /boot/config/smart-one.cfg

with

[ST10000NM001G-Identification_1]
hotTemp="48"
[ST10000NM001G-Identification_2]
hotTemp="48"
[ST10000NM001G-Identification_3]
hotTemp="48"
[ST10000NM001G-Identification_4]
hotTemp="48"
[ST10000NM001G-Identification_5]
hotTemp="48"

it seams to help

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.