HI All,

 

Been trying to fix this for a while.

 

Ive seen that a couple people have had this issue but havent seen a fix

 

Im still very new to unraid so sorry if i get confused

 

Any advice would be welcomed

 

Many thanks,

Hi, so to understand better, your 10Gb connection is OK at server startup, then after some time it does not work any more and you have to reboot the server ?

Is this your only connection ?

 

Your diagnostics after the problem happens and before you reboot might help understand what happens to you.

When you have the issue, go to Tools / Diagnostics and attach the zip file to your next post.

17 hours ago, ChatNoir said:

Hi, so to understand better, your 10Gb connection is OK at server startup, then after some time it does not work any more and you have to reboot the server ?

Is this your only connection ?

 

Your diagnostics after the problem happens and before you reboot might help understand what happens to you.

When you have the issue, go to Tools / Diagnostics and attach the zip file to your next post.

Hi,

 

Thanks for your message.

 

I mainly use the 10G connection for transffering files from my local pc to my unraid box, mainly for backup's

 

I have access to the unraid box through a gigabit switch

 

Please see the attached .zip files

 

The one ending '2330 was taken yesterday after a reboot

 

The one ending '1237 was taken a few minutes ago from today.

 

It was working this morning but after i come back to my pc it no longer works

 

Please let us know if you find anything or if theres anything else i can try

 

Many thanks,

 

DaButterGamer

 

 

mimir-diagnostics-20210515-1237.zip mimir-diagnostics-20210514-2330.zip

Edited May 15, 20215 yr by DaButterGamer
typos

You might want to look at the cooling of your 10Gb NIC :

May 15 12:00:29 Mimir kernel: net eth1: Device temperature 108 degrees C exceeds maximum allowed. Hardware has been shut down.
May 15 12:00:29 Mimir kernel: net eth2: Device temperature 108 degrees C exceeds maximum allowed. Hardware has been shut down.
May 15 12:00:29 Mimir kernel: qlcnic 0000:26:00.1: Detaching the device: peg halt status1=0x80001303
May 15 12:00:29 Mimir kernel: qlcnic 0000:26:00.1: Device state set to Failed. Please Reboot
May 15 12:00:33 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:33 Mimir kernel: qlcnic 0000:26:00.0: Failed to destroy rx ctx in firmware
May 15 12:00:37 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:37 Mimir kernel: qlcnic 0000:26:00.0: Failed to destroy tx ctx in firmware
May 15 12:00:41 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:41 Mimir kernel: qlcnic 0000:26:00.0: Failed to destroy tx ctx in firmware
May 15 12:00:45 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:45 Mimir kernel: qlcnic 0000:26:00.0: Failed to destroy tx ctx in firmware
May 15 12:00:49 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:49 Mimir kernel: qlcnic 0000:26:00.0: Failed to destroy tx ctx in firmware
May 15 12:00:53 Mimir kernel: qlcnic 0000:26:00.0: command timeout, response = 0x3
May 15 12:00:53 Mimir kernel: qlcnic 0000:26:00.0 eth1: Failed to Delete interrupts 17
May 15 12:00:53 Mimir kernel: qlcnic 0000:26:00.0: Detaching the device: peg halt status1=0x80001303
May 15 12:00:53 Mimir kernel: qlcnic 0000:26:00.0: Device state set to Failed. Please Reboot
May 15 12:00:53 Mimir kernel: br1: port 1(eth1) entered disabled state

 

Thanks for looking into it for me

 

Ill whack up the fan speed

 

Any reason why it would be going that high. Its been sitting Idle

 

Would it be worth swapping out the nic or adding some heatsinks on it

 

Many thanks,