mdrodge Posted January 11, 2022 Share Posted January 11, 2022 5 hours ago, Einsteinjr said: Has anyone successfully farmed a chive currency on here? I can't see anything wrong with the logs, but I'm still sitting at zero after at least 8 weeks of farming 90TB of plots. Curiously, when I tried doing a pool with chives, the pool summary (I tried 2 different pools) always thought I had zero plots. The pool is good but you need to plot the new NFT k29 plots. (they are pretty easy to plot so you can spit out loads with any old pc) I have a 200tb farm and only have room for 100 Chive plots so I was only winning once every 2 months until I joined the pool Quote Link to comment
mungler Posted January 12, 2022 Share Posted January 12, 2022 (edited) Hi, One thing i've noticed is that my server reports 100% CPU usage basically all the time. I took a look at `top`, and notice that it always seems to be the chia full node process thats eating CPU. The other coins are hovering at a handful of %, with occasional spikes, but chia always seems to be eating CPU. Is this likely to be some side-effect of the fact i'm not actually farming any plots for Chia? Some busy-loop thing happening in the Chia side? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17076 root 20 0 878384 466924 7392 R 98.0 2.9 1:35.00 chia_full_node Edited January 12, 2022 by mungler Quote Link to comment
SohailS Posted January 12, 2022 Share Posted January 12, 2022 On 1/7/2022 at 11:16 PM, guy.davis said: Sorry to hear that. Yes, Chia can be a bit finicky at times. Please see the wiki for troubleshooting tips. I have been through all of the troubleshooting steps and just cant get it working again. is their any guidance you can provide? Quote Link to comment
guy.davis Posted January 12, 2022 Author Share Posted January 12, 2022 1 hour ago, SohailS said: I have been through all of the troubleshooting steps and just cant get it working again. is their any guidance you can provide? Absolutely. Join the Discord for an interactive support session. Quote Link to comment
Einsteinjr Posted January 12, 2022 Share Posted January 12, 2022 7 hours ago, mungler said: Hi, One thing i've noticed is that my server reports 100% CPU usage basically all the time. I took a look at `top`, and notice that it always seems to be the chia full node process thats eating CPU. The other coins are hovering at a handful of %, with occasional spikes, but chia always seems to be eating CPU. Is this likely to be some side-effect of the fact i'm not actually farming any plots for Chia? Some busy-loop thing happening in the Chia side? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17076 root 20 0 878384 466924 7392 R 98.0 2.9 1:35.00 chia_full_node You're gonna need to provide more information for something like this. Are you confident that the chia fork has completed all the synching? It will eat up a lot of CPU as it is synching. Quote Link to comment
mungler Posted January 12, 2022 Share Posted January 12, 2022 3 minutes ago, Einsteinjr said: You're gonna need to provide more information for something like this. Are you confident that the chia fork has completed all the synching? It will eat up a lot of CPU as it is synching. Hi, you're right, turns out I hadn't opened the chia port and it was stuck at: Current Blockchain Status: Syncing 0/1412351. I'll open the port and wait for full sync, I guess! Thanks Quote Link to comment
mdrodge Posted January 13, 2022 Share Posted January 13, 2022 17 hours ago, mungler said: Thanks In the unriad settings page you'll see CPU Pinning, there you can limit the amount of cores/threads an app or vm is allowed. (You could limit Machinaris to %80 of the cores for example) It is highly recommended to leave thread 0 free so only unraid can use it. It's important to do this so unraid can perform It's tasks in the background. If you have any vm's you can add there cores to the cpu isolation if you want (optional) 1 Quote Link to comment
mungler Posted January 13, 2022 Share Posted January 13, 2022 Hey, thanks for the tip. In fact, the unraid box in question is fairly underpowered - the CPU is listed as: "AMD Turion™ II Neo N54L Dual-Core @ 2200 MHz" - but is also dedicated to Machinaris and hpool. It does literally nothing else, so I think I can get away with not bothering pinning. I actually have two of these boxes, HP N54L microservers, each running unraid - one for farming and one for everything else 😁 both stuffed with disks. Cheers! Quote Link to comment
Andrew255 Posted January 13, 2022 Share Posted January 13, 2022 Hi, I have machinaris-maize up and farming: `Active` for quite some time already until today I discovered that there is no wallet DB synced for this crypto at all. Blockchain DB is fully synced, showing Farming status. Wallet process is up and I can see active traffic for Wallet entry within Connections tab, but sqlite file timestamp in ../wallet/db/ folder gets only updated with container boot time and then no changes at all. Even `Wallet height` shows just 0 Wallet height: 0 Sync status: Not synced I restarted docker couple of times - same result. Does anyone had similar issue? This is first time for me, all other fork works just fine. Thanks Andrew Quote Link to comment
eagle470 Posted January 13, 2022 Share Posted January 13, 2022 Machinaris - Chia wallet showing Zero Balance when actual is 0.00000278091 XCH My Balance can be seen here: https://www.chiaexplorer.com/blockchain/address/xch1yyv0nrm4nncskesmurty0hed20cypuvha8wxzhf295tx7cyqm99syng7rn I've done a transaction SINCE getting synced. my wallet status below: Wallet in Machinaris I can't find a command to force a recheck. Please advise. Also, should I have the plotter auto start on launch and how do I do that? Can someone send me a link telling me about the difference between plot types too? I'm just starting to learn about this and I feel like I'm drowning. Thanks Quote Link to comment
guy.davis Posted January 13, 2022 Author Share Posted January 13, 2022 27 minutes ago, Andrew255 said: Hi, I have machinaris-maize up and farming: `Active` for quite some time already until today I discovered that there is no wallet DB synced for this crypto at all. Blockchain DB is fully synced, showing Farming status. Wallet process is up and I can see active traffic for Wallet entry within Connections tab, but sqlite file timestamp in ../wallet/db/ folder gets only updated with container boot time and then no changes at all. Even `Wallet height` shows just 0 Wallet height: 0 Sync status: Not synced I restarted docker couple of times - same result. Does anyone had similar issue? This is first time for me, all other fork works just fine. Thanks Andrew Sorry to hear that. Some recent updates to blockchains have required some users (not all) to reset the config.yaml file they may have from an older version of the blockchain, to the latest version (default). Try this quick fix first. If that doesn't work, you may need to remove the wallet folder entirely and restart. This should perform a wallet resync. Details for both fixes are on the wiki. Quote Link to comment
guy.davis Posted January 13, 2022 Author Share Posted January 13, 2022 6 minutes ago, eagle470 said: Machinaris - Chia wallet showing Zero Balance when actual is 0.00000278091 XCH My Balance can be seen here: https://www.chiaexplorer.com/blockchain/address/xch1yyv0nrm4nncskesmurty0hed20cypuvha8wxzhf295tx7cyqm99syng7rn I've done a transaction SINCE getting synced. my wallet status below: Wallet in Machinaris I can't find a command to force a recheck. Please advise. Also, should I have the plotter auto start on launch and how do I do that? Can someone send me a link telling me about the difference between plot types too? I'm just starting to learn about this and I feel like I'm drowning. Thanks Hi, I suspect you have an issue that requires the back and forth Discord affords. However, the wiki has lots of good information as well. In your particular case, this feels like you may have loaded more than one Chia mnemonic/key? I would recommend opening the Docker Console to Machinaris from the Unraid Admin UI | Docker tab. Then you can enter commands such as: chia farm summary chia plots show chia wallet show chia keys show Ideally, those commands return neither errors or input prompts. Hope this helps! Quote Link to comment
eagle470 Posted January 13, 2022 Share Posted January 13, 2022 24 minutes ago, guy.davis said: Hi, I suspect you have an issue that requires the back and forth Discord affords. However, the wiki has lots of good information as well. In your particular case, this feels like you may have loaded more than one Chia mnemonic/key? I would recommend opening the Docker Console to Machinaris from the Unraid Admin UI | Docker tab. Then you can enter commands such as: chia farm summary chia plots show chia wallet show chia keys show Ideally, those commands return neither errors or input prompts. Hope this helps! On discord now 1 Quote Link to comment
Andrew255 Posted January 14, 2022 Share Posted January 14, 2022 8 hours ago, guy.davis said: Sorry to hear that. Some recent updates to blockchains have required some users (not all) to reset the config.yaml file they may have from an older version of the blockchain, to the latest version (default). Try this quick fix first. If that doesn't work, you may need to remove the wallet folder entirely and restart. This should perform a wallet resync. Details for both fixes are on the wiki. thanks for getting back on my issue @guy.davis Forgot to mentioned. I already deleted `db` subfolder within /wallet/, but still only new blockchain_wallet_v1_mainnet files created and they are not growing in size after boot at all. how i can reset config.yaml file to the latest version? Quote Link to comment
guy.davis Posted January 14, 2022 Author Share Posted January 14, 2022 8 hours ago, Andrew255 said: thanks for getting back on my issue @guy.davis Forgot to mentioned. I already deleted `db` subfolder within /wallet/, but still only new blockchain_wallet_v1_mainnet files created and they are not growing in size after boot at all. how i can reset config.yaml file to the latest version? Please see this section of the wiki: For a fork on Unraid the path is: /mnt/user/appdata/machinaris-FORK/FORK/mainnet/config/config.yaml Quote Link to comment
Andrew255 Posted January 14, 2022 Share Posted January 14, 2022 3 hours ago, guy.davis said: Please see this section of the wiki: For a fork on Unraid the path is: /mnt/user/appdata/machinaris-FORK/FORK/mainnet/config/config.yaml Thank you so much, looks promising, after deleting config.yaml and reloading container, sqlite file start growing Quote Link to comment
Helmonder Posted January 15, 2022 Share Posted January 15, 2022 (edited) Quick question: I once installed the Chives docker only to realise that I would not need to replot for using it, so I removed it. Now however it continues to show up in my summary and farming page (not doing anything ofcourse, the docker is gone), how do I make sure machinares "forgets" that I once used it ? Edited January 15, 2022 by Helmonder Quote Link to comment
eagle470 Posted January 15, 2022 Share Posted January 15, 2022 I have 8 plot files but no plots showing in the GUI. Any thoughts on what is wrong? Quote Link to comment
DoeBoye Posted January 15, 2022 Share Posted January 15, 2022 1 hour ago, Helmonder said: Quick question: I once installed the Chives docker only to realise that I would not need to replot for using it, so I removed it. Now however it continues to show up in my summary and farming page (not doing anything ofcourse, the docker is gone), how do I make sure machinares "forgets" that I once used it ? Try stopping machinaris, delete machinaris.db, restart. It'll rebuild and clean up any orphaned references. Quote Link to comment
eagle470 Posted January 15, 2022 Share Posted January 15, 2022 So you do need to replot for chive or no? Can you use the same plots? Quote Link to comment
guy.davis Posted January 15, 2022 Author Share Posted January 15, 2022 3 hours ago, Helmonder said: I once installed the Chives docker only to realise that I would not need to replot for using it, so I removed it. Now however it continues to show up in my summary and farming page (not doing anything ofcourse, the docker is gone), how do I make sure machinares "forgets" that I once used it ? Please visit the Workers page. Select all Chives rows and then click 'Prune Selected' button. Quote Link to comment
guy.davis Posted January 15, 2022 Author Share Posted January 15, 2022 1 hour ago, eagle470 said: So you do need to replot for chive or no? Can you use the same plots? Chives requires new plots as per the wiki. Quote Link to comment
guy.davis Posted January 15, 2022 Author Share Posted January 15, 2022 1 hour ago, eagle470 said: I have 8 plot files but no plots showing in the GUI. Any thoughts on what is wrong? Please ensure you have "plots_dir" variable set correctly in the Unraid Docker template for Machinaris. However, there are other possible misconfigurations. Please see troubleshooting guide on the wiki as well. Quote Link to comment
eagle470 Posted January 15, 2022 Share Posted January 15, 2022 2 hours ago, guy.davis said: Please ensure you have "plots_dir" variable set correctly in the Unraid Docker template for Machinaris. However, there are other possible misconfigurations. Please see troubleshooting guide on the wiki as well. OK, so here is my layout: /plotting/mnt/plots/fastplots/ /root/.chia/mnt/user/appdata/machinaris/ /plots1/mnt/user/farmPlots/ Here are the check for contents: root@Tower:/mnt/user/farmPlots# ls plot-k32-2022-01-14-14-32-a428c3525c237e0368eaef58e7d792a5c5109d7b2114c757aadfbc3d75a205c9.plot plot-k32-2022-01-14-16-47-fd00caba92ad301ac959c84470cd0d4ab3f7998c0d1f083ee84c5659667a0cdc.plot plot-k32-2022-01-14-22-18-a8a917b5b70784b002ba14a389c4cd38b26352eab0c9ab3ba80d1eb343e7e998.plot plot-k32-2022-01-14-23-43-6c7b7d5a045c0f69d54417aabde603f0943e4d16d59221c8fdce97e9b516a4cd.plot plot-k32-2022-01-15-01-07-41d87cf23f9eedd6a9783a601e8fc0706ce15c2a73e548e002a7c19637043d71.plot plot-k32-2022-01-15-02-29-3c004ea5f2ea5c6ef3f90fce8bfb9a36d7352e1bbbfce3018b8006eb14968789.plot plot-k32-2022-01-15-03-52-9a37f21ff8014d856d6c6d96d82e2b142cd7e046ca0f6688f73ae14cf861c8a2.plot plot-k32-2022-01-15-05-15-3b6d2521f6fbec34d4296a67ebe610fa9d8ef9b6fd4b6934fb3ea9e55c140691.plot plot-k32-2022-01-15-06-38-2df94add80eaf76f71b36e9566c5da12492121ed4f90d4d77d036bedd3eb1a5d.plot plot-k32-2022-01-15-08-01-15c3be5c80d3b9730b21ac390b5a8d73d02acfd8e593287c1da5fcbbcd90d64a.plot plot-k32-2022-01-15-09-24-0f858ace114063ce86224804bbdf1253ec224d29d52b5f9c949649d4ef69c52f.plot.tmp when I run LS on the array side of the /plotting directory, I get this: root@Tower:/mnt/user/fastplots# ls plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_149.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_150.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_151.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_152.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_153.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_154.tmp ... plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_96.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_97.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_98.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_99.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.table1.tmp I'm not sure what log to look at right now as my plotman log doesn't look awful, though it has a different problem (see attached) plotman.log 2022-01-15T11_52_26.866913-06_00.plot.log apisrv.log Quote Link to comment
guy.davis Posted January 15, 2022 Author Share Posted January 15, 2022 13 minutes ago, eagle470 said: OK, so here is my layout: /plotting/mnt/plots/fastplots/ /root/.chia/mnt/user/appdata/machinaris/ /plots1/mnt/user/farmPlots/ Here are the check for contents: root@Tower:/mnt/user/farmPlots# ls plot-k32-2022-01-14-14-32-a428c3525c237e0368eaef58e7d792a5c5109d7b2114c757aadfbc3d75a205c9.plot plot-k32-2022-01-14-16-47-fd00caba92ad301ac959c84470cd0d4ab3f7998c0d1f083ee84c5659667a0cdc.plot plot-k32-2022-01-14-22-18-a8a917b5b70784b002ba14a389c4cd38b26352eab0c9ab3ba80d1eb343e7e998.plot plot-k32-2022-01-14-23-43-6c7b7d5a045c0f69d54417aabde603f0943e4d16d59221c8fdce97e9b516a4cd.plot plot-k32-2022-01-15-01-07-41d87cf23f9eedd6a9783a601e8fc0706ce15c2a73e548e002a7c19637043d71.plot plot-k32-2022-01-15-02-29-3c004ea5f2ea5c6ef3f90fce8bfb9a36d7352e1bbbfce3018b8006eb14968789.plot plot-k32-2022-01-15-03-52-9a37f21ff8014d856d6c6d96d82e2b142cd7e046ca0f6688f73ae14cf861c8a2.plot plot-k32-2022-01-15-05-15-3b6d2521f6fbec34d4296a67ebe610fa9d8ef9b6fd4b6934fb3ea9e55c140691.plot plot-k32-2022-01-15-06-38-2df94add80eaf76f71b36e9566c5da12492121ed4f90d4d77d036bedd3eb1a5d.plot plot-k32-2022-01-15-08-01-15c3be5c80d3b9730b21ac390b5a8d73d02acfd8e593287c1da5fcbbcd90d64a.plot plot-k32-2022-01-15-09-24-0f858ace114063ce86224804bbdf1253ec224d29d52b5f9c949649d4ef69c52f.plot.tmp when I run LS on the array side of the /plotting directory, I get this: root@Tower:/mnt/user/fastplots# ls plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_149.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_150.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_151.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_152.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_153.tmp plot-k32-2022-01-14-14-26-445714c916852910ef727b6349631216527ec7fe2e0ef736c962ab55c7ec715f.p1.t1.sort_bucket_154.tmp ... plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_96.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_97.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_98.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.t2.sort_bucket_99.tmp plot-k32-2022-01-15-11-52-6691b47645b303070447c20b762238a6299b58915c4ace788610aade9b9a1c77.p1.table1.tmp I'm not sure what log to look at right now as my plotman log doesn't look awful, though it has a different problem (see attached) plotman.log 174.46 kB · 0 downloads 2022-01-15T11_52_26.866913-06_00.plot.log 821 B · 0 downloads apisrv.log 1.05 MB · 0 downloads Please open the Docker Console for Machinaris from the Unraid Admin UI | Docker tab. When at the in-container console for Machinaris type: env | grep -i plots_dir chia plots show chia farm summary chia keys show chia wallet show Don't paste the output here. However, please review it for any errors or misconfigurations. Also visit the Farming page of the Machinaris, select your Fullnode by worker hostname, then choose Chia from the menu. This will open the Chia farming log for you to review. Hope this helps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.