Sulprax Posted May 26, 2021 Share Posted May 26, 2021 (edited) Hello all you lovely smart people, I'm new to unraid and currently running the trial version of unraid. I have over 900 dvds and was looking at using unraid to save space After 14 hours of it being in use all of a sudden I can't access the Web gui or any media on the server, this is the 4th time it has happened and I usually just hard power it off and back on. It happens randomly. Current trial system specs: . Intel Core i5-4570 3.2 GHz Quad-Core Processor . MSI Z87 MPOWER ATX LGA1150 Motherboard . 20gb ddr3 memory . 1 x 80gb ssd . 2 x 3tb wd red . 1 x 1tb Toshiba Dockers running: . Sabnzb . Radarr . Sonarr . Plex No vms yet will do when I have all the hardwear I want to finally use. There is no overclocking applied, there is no screen attached. All of the cores of the cpu run at 100% but I think that's because of the unpacking on sabnzb. Regards in advance Edited May 26, 2021 by Sulprax More information Quote Link to comment
JorgeB Posted May 26, 2021 Share Posted May 26, 2021 Enable this then post that log after a crash together with the diagnostics. 1 Quote Link to comment
Sulprax Posted May 26, 2021 Author Share Posted May 26, 2021 I hope these are the correct files regards diagonalley-diagnostics-20210523-0525.zip syslog Quote Link to comment
JorgeB Posted May 26, 2021 Share Posted May 26, 2021 The syslog is after a crash, wait for another crash then post it. 1 Quote Link to comment
Sulprax Posted May 26, 2021 Author Share Posted May 26, 2021 okie dokie will do thank you, new to all this and a wee bit thick when it comes to it haha Quote Link to comment
Sulprax Posted May 27, 2021 Author Share Posted May 27, 2021 @JorgeB ok last night i had a red x on one of my drives so i got the server to rebuild data all was going good i went to sleep checked at 5am still working good and still rebuilding the disk it was on 70% at 10 o'clock i couldn't access plex or login to my server so rebooted it. I couldn't upload the syslog error code -200 so i deleted a lot of the disk errors from the log to allow me to upload the file. I have attached the logs for you to have a look at. Thank you in advance, I highly appreciate all that help me. diagonalley-diagnostics-20210523-0525.zip diagonalley-diagnostics-20210527-0111.zip unbalance.log syslog Quote Link to comment
JorgeB Posted May 27, 2021 Share Posted May 27, 2021 During the parity check there are constant errors form the Unraid md driver, either you have some hardware issue or it doesn't like your hardware, unfortunately no idea if it's one or the other, do you have a different board/PC you could test with? 1 Quote Link to comment
Sulprax Posted May 27, 2021 Author Share Posted May 27, 2021 oh, unfortunately I don't have any other hardware on hand yet, this is my testing setup before i purchases the final parts for my unraid build, still deciding between amd and intel. Weird that it doesn't like my hardware, wonder if there is any apps i could install to further diagnose my problem. thank you for your help i highly appreciate it regards Sulprax Quote Link to comment
JorgeB Posted May 27, 2021 Share Posted May 27, 2021 You can try v6.8.3, since it uses a different kernel it might behave differently, if it doesn't then problem is more likely hardware related. 1 Quote Link to comment
Sulprax Posted June 3, 2021 Author Share Posted June 3, 2021 @jorgeB Today someone donated me a spare motherboard that works with my cpu and memory its a ASRock B85M Pro3 so i quickly ripped out the old motherboard and threw this one in as my last setup kept crashing constantly, never been able to finish a data rebuild or anything. I thought yes this is working then after 3 hours, plex stopped working so i went to look at the dockers and there was no dockers just an error stating "dockers couldn't be started" so i rebooted the system parity sync and data rebuild starts with the array, but now i have these errors under fix common problems: Unable to write to disk1 Unable to write to Docker Image go to my shares tab and there is no shares to display only disk 1 and 2 and I cant start a docker i have now turned on syslog server and report back with what its recorded in the morning. regards Sulprax Quote Link to comment
JorgeB Posted June 4, 2021 Share Posted June 4, 2021 Please post the diagnostics: Tools -> Diagnostics 1 Quote Link to comment
Sulprax Posted June 4, 2021 Author Share Posted June 4, 2021 (edited) @JorgeB i couldn't access the web gui for ages it wasn't booting correctly just got it to boot everything seemed ok and now my share directories have just disappeared again. attached the diagnostics for you. thank you for your help. diagonalley-diagnostics-20210604-1401.zip Edited June 4, 2021 by Sulprax Quote Link to comment
JorgeB Posted June 4, 2021 Share Posted June 4, 2021 Fix filesystem on disk1: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Run it without -n or nothing will be done. 1 Quote Link to comment
Sulprax Posted June 4, 2021 Author Share Posted June 4, 2021 @JorgeB Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... done Quote Link to comment
Sulprax Posted June 4, 2021 Author Share Posted June 4, 2021 (edited) @JorgeB Thank you i'm just doing parity sync and data rebuild now will keep you updated. sorry if i seem like a noob still new to all this. just my luck my case has gone missing in the post too. Regards Sulprax Edited June 4, 2021 by Sulprax Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.