NordVPN

[BrutalHarmony]

Hello and thank you very much for the tutorial with which I managed to connect NordVPN.



then, with the console and "curl ifconfig.io" I get the following output, everything ok, connected!
NordLynx:


For testing purposes, I tried connecting my Radarr container through NORDLYNX.
Test with the Console and Curl results in the following, all also here everything ok!
Radarr:


But, when I try to reach the GUi the following error comes in Chrome:



My settings in NordLynx are as follows:




and still as additional paramenter:



My settings in Radarr are as follows:





The question is, what have I set wrong so that I can reach the GUI of Radarr again?

I am very much looking forward to some constructive help!
Thank you in advance and hereby donate the helper a virtual beer from 🇩🇪

p.s.: If I manage to get it done I will create a simple illustrated step by step tutorial

Edited June 8, 2023 by BrutalHarmony

[HomerJ]

On 6/9/2023 at 4:34 AM, BrutalHarmony said:

Hello and thank you very much for the tutorial with which I managed to connect NordVPN.



then, with the console and "curl ifconfig.io" I get the following output, everything ok, connected!
NordLynx:


For testing purposes, I tried connecting my Radarr container through NORDLYNX.
Test with the Console and Curl results in the following, all also here everything ok!
Radarr:


But, when I try to reach the GUi the following error comes in Chrome:



My settings in NordLynx are as follows:




and still as additional paramenter:



My settings in Radarr are as follows:





The question is, what have I set wrong so that I can reach the GUI of Radarr again?

I am very much looking forward to some constructive help!
Thank you in advance and hereby donate the helper a virtual beer from 🇩🇪

p.s.: If I manage to get it done I will create a simple illustrated step by step tutorial

 

Did you ever get this figured out?

 

In any case I'm so glad for your post because I was struggling to get this working. Every time I would check the IP address when I looked it up it was showing my own country, despite choosing another country. What I had done was I missed the extra part I had to add on the QUERY bit. Once I added that, I finally had success. 

 

Next I'll be working on the same thing you are above. If i can get it working, I'll let you know. I have routed containers before like this and if I remember correctly I had to use a very different IP address to access the container. My local IP addresses start with 192 but I think the addresses to the containers changed to ones that started with 127. Anyways, I'm rambling now..... Just a little excited that after many hours I finally have this working!!

[Mattti1912]

Hello

 

I have a few questions, is it possible to use meshnet with this applikcation?? And if so, do anyone have a guide??

further more if i search nordvpn, in applications. I only get one app called glutenvpn.

So how to get this docker??

 

Thank you

Regards

[IamDan]

Hello all. I have just started getting an issue where nordlynx cannot select a server. It was previously working without issue

 

parse error: Invalid numeric literal at line 1, column 7
[migrations] started
[migrations] no migrations found
[2024-03-18T20:35:37+00:00] Firewall is up, everything has to go through the vpn
usermod: no changes
───────────────────────────────────────
  _____ __ __ _____ _____ _____ _____ 
 |     |  |  |   __|_   _|     |     |
 |   --|  |  |__   | | | |  |  | | | |
 |_____|_____|_____| |_| |_____|_|_|_|
       _____ __ __ _ __    ____  
      | __  |  |  | |  |  |    \ 
      | __ -|  |  | |  |__|  |  |
      |_____|_____|_|_____|____/ 

  Based on images from linuxserver.io
───────────────────────────────────────

To support the app dev(s) visit:
Bubuntux: https://github.com/sponsors/bubuntux
WireGuard: https://www.wireguard.com/donations/
To support LSIO projects visit:
https://www.linuxserver.io/donate/

───────────────────────────────────────
GID/UID
───────────────────────────────────────

User UID:    911
User GID:    911
───────────────────────────────────────

[2024-03-19T07:35:37+11:00] Enabling connection to eth0 172.17.0.3/16
[2024-03-19T07:35:37+11:00] Enabling connection to secure interfaces
[2024-03-19T07:35:37+11:00] No interface network6 detected
[2024-03-19T07:35:37+11:00] Enabling connection to network 192.168.0.0/16
[custom-init] No custom files found, skipping...
[ls.io-init] done.
[2024-03-19T07:35:37+11:00] Finding the best server...
[2024-03-19T07:35:49+11:00] Unable to select a server ¯\_(⊙︿⊙)_/¯

 

 

I am unsure what is happening here. Has anyone seen this before?

 

 

EDIT: I did a forced update and it all fired back up

 

DOUBLE EDIT: Its failed again with the same issue. Tried to force the update but it does not resolve the problem

 

Edited March 22 by IamDan

[medicmandan]

I finally managed to get Nord setup and connected to Australia.  I'm struggling routing Emby through it.  The few attempts I have made crash the docker.  My remote connection to Emby is presently timing out.

 

Which ports do I need to setup in Nord for Emby, the local or the public (or both)?  What settings need to be added in Emby/Swag?

Edited March 23 by medicmandan