timethrow Posted May 29, 2021 Share Posted May 29, 2021 I have purchased a Dual NIC and installed it in my unRAID device, however it does not appear to be detecting it and allowing me to use it. I have tried reseating the NIC and moving it to another slot on the Motherboard but no luck. I did install it in another PC as a test and that uses Windows, and it detected it fine. This is the NIC I am using; https://www.amazon.co.uk/gp/product/B07Y1P4DGV I can't see anything obvious in the logs, and can see my onboard NIC shows up fine, but could well be missing something. Any help / advice is greatly appreciated. Thanks! tower-diagnostics-20210529-2207.zip Quote Link to comment
SimonF Posted May 29, 2021 Share Posted May 29, 2021 Card doesn't seem to be in lspci, which motherboard slot is it in, have you confirmed slot is avaiilable if nvme etc are conmected. 1 Quote Link to comment
timethrow Posted May 29, 2021 Author Share Posted May 29, 2021 3 minutes ago, SimonF said: Card doesn't seem to be in lspci, which motherboard slot is it in, have you confirmed slot is avaiilable if nvme etc are conmected. Thanks for having a look. Its currently in PCIEX1_1 and has also been tested in PCIEX1_2. I did have a USB Expansion Card in that slot before, and any devices connected always seems to show as expected, so it should be working. Quote Link to comment
SimonF Posted May 29, 2021 Share Posted May 29, 2021 (edited) PCIEX16_3 Control [Auto] If PCIEX16_3 is detected, run X4 mode and disable PCIEX1_1 + PCIEX1_2 + PCIEX1_3, otherwise enable PCIEX1_1 + PCIEX1_2 + PCIEX1_3. [X1 mode] PCIEX16_3 runs X1 mode and enable PCIEX1_1 + PCIEX1_2 + PCIEX1_3. [X4 mode] PCIEX16_3 runs X4 mode and disable PCIEX1_1 + PCIEX1_2 + PCIEX1_3. @timethrowDo you have any thing in 16_3 Edited May 29, 2021 by SimonF 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.