WILLSOCK Posted June 1, 2021 Share Posted June 1, 2021 版本,6.9.2 cpu:i5 9500t 内存:8g Docker:QB荒野无灯 宽带:500MB下载,30MB上传 我用tr下载,速度很慢,只能在5MB,上传几乎0。换成QB,下载速度能上到60MB以上,上传也很给力。 但CPU在即使没下载的情况下,占用可以达到90%甚至接近100%。 跪求解决方案,非常困扰我。 Quote Link to comment
lyqalex Posted June 2, 2021 Share Posted June 2, 2021 qbittorrent是很耗资源的,但确实比TR好用,尤其是无外网ip的时候。可以试试其他版本的qbittorrent,如hotio的qbittorrent,最大优点是可以设置灵活的端口,支持随机端口。 PS:为减少资源占用,下载盘不要在阵列内。为确保较大限度的安全,尽量使用unraid应用商店的程序。 Quote Link to comment
WILLSOCK Posted June 2, 2021 Author Share Posted June 2, 2021 6 minutes ago, lyqalex said: qbittorrent是很耗资源的,但确实比TR好用,尤其是无外网ip的时候。可以试试其他版本的qbittorrent,如hotio的qbittorrent,最大优点是可以设置灵活的端口,支持随机端口。 PS:为减少资源占用,下载盘不要在阵列内。为确保较大限度的安全,尽量使用unraid应用商店的程序。 我有外网ip。随机端口的好处是?我这个荒野无灯的版本好像也可以。 Quote Link to comment
lyqalex Posted June 2, 2021 Share Posted June 2, 2021 有外网最好了,qbittorrent用host模式,路由器开upnp,每次启动qb,端口映射到路由器都自动不同,安全些把。荒野qbittorrent非官方软件商店应用,不推荐使用。 Quote Link to comment
WILLSOCK Posted June 2, 2021 Author Share Posted June 2, 2021 使用host,会不会影响下载和上传速度?另外就是,unraid下,pt下载,有什么既能保证速度,又没这么占用资源的docker 吗?目前这个QB,几乎占满了我的cpu。 Quote Link to comment
lyqalex Posted June 2, 2021 Share Posted June 2, 2021 可以测试一些嘛,host是把这个docker作为一个单独的节点,除了qb,tr,暂时没想到什么了。换另外的qb试试。下载盘一定不要放阵列内,放独立的pool或者Unassigned Devices里面把。 1 Quote Link to comment
WILLSOCK Posted June 2, 2021 Author Share Posted June 2, 2021 下载盘不在阵列里的话,不就完全没有保护了? Quote Link to comment
lyqalex Posted June 2, 2021 Share Posted June 2, 2021 下载盘一般是临时存储的盘比较好,下载好了的数据电影什么的,抽空转移到阵列里的数据盘,如果下载盘在阵列,很耗资源的,也增加校验盘的损耗。 Quote Link to comment
lyqalex Posted June 2, 2021 Share Posted June 2, 2021 你可以安装binhex-krusader这个文件管理器,把下载盘的数据复制粘贴到数据盘,后台运作,关了电脑就让服务器自己跑好了。 Quote Link to comment
WILLSOCK Posted June 2, 2021 Author Share Posted June 2, 2021 非常感谢。学习到了。我这就去尝试一下。 Quote Link to comment
pinkfloyd Posted June 27, 2021 Share Posted June 27, 2021 On 6/3/2021 at 12:54 AM, lyqalex said: 下载盘一般是临时存储的盘比较好,下载好了的数据电影什么的,抽空转移到阵列里的数据盘,如果下载盘在阵列,很耗资源的,也增加校验盘的损耗。 如果没有使用校验盘,是不是不用考虑你说的这个 Quote Link to comment
pinkfloyd Posted June 27, 2021 Share Posted June 27, 2021 On 6/3/2021 at 12:49 AM, lyqalex said: 可以测试一些嘛,host是把这个docker作为一个单独的节点,除了qb,tr,暂时没想到什么了。换另外的qb试试。下载盘一定不要放阵列内,放独立的pool或者Unassigned Devices里面把。 怎么配置独立的pool Quote Link to comment
lyqalex Posted June 29, 2021 Share Posted June 29, 2021 On 6/27/2021 at 9:29 PM, pinkfloyd said: 如果没有使用校验盘,是不是不用考虑你说的这个 是的。 Quote Link to comment
lyqalex Posted June 29, 2021 Share Posted June 29, 2021 On 6/27/2021 at 9:30 PM, pinkfloyd said: 怎么配置独立的pool 在主界面,停止阵列,然后会见到add pool。 Quote Link to comment
uniartisan Posted March 4, 2022 Share Posted March 4, 2022 可以限制qb使用的CPU核心,只给超线程即可,或者给1-2颗,但可能降低下载速度。 Quote Link to comment
lagunapata Posted March 4, 2022 Share Posted March 4, 2022 On 6/3/2021 at 12:51 AM, WILLSOCK said: 下载盘不在阵列里的话,不就完全没有保护了? 下载的时候最好别把临时数据写到带校验的阵列里 下载软件一写入CPU负载就很高 我是把incomplete目录放cache里了 完成之后PT软件会自动转存到媒体目录 然后等move Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.