Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 die waren einfach da... ohne das ich was gemacht hab... ok lösche ich raus und fange dann noch mal an. Quote Link to comment
Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 (edited) @vakilando so hier mein Docker... passt das so? Edited June 9, 2021 by Hoddl Quote Link to comment
Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 was muss den bei WebUI rein??? Quote Link to comment
vakilando Posted June 9, 2021 Share Posted June 9, 2021 11 minutes ago, Hoddl said: was muss den bei WebUI rein??? http://[IP]:[PORT:86]/ Quote Link to comment
vakilando Posted June 9, 2021 Share Posted June 9, 2021 12 minutes ago, Hoddl said: so hier mein Docker... passt das so? ja, wenn du die Variablen noch ausfüllst (siehe mein Screenshot). Quote Link to comment
Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 ich komm nicht auf die WebUI seite nicht gefunden. Im Protokoll sind auch fehler: FehlerWarnungSystemArrayAnmelden [marthoc/deconz] Starting deCONZ... [marthoc/deconz] Current deCONZ version: 2.12.00 [marthoc/deconz] Web UI port: 80 [marthoc/deconz] Websockets port: 443 [marthoc/deconz] VNC Disabled QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root' libpng warning: iCCP: known incorrect sRGB profile This plugin does not support propagateSizeHints() This plugin does not support propagateSizeHints() 20:28:20:432 HTTP Server listen on address 0.0.0.0, port: 8080, root: /usr/share/deCONZ/webapp/ 20:28:20:504 ZCLDB init file /root/.local/share/dresden-elektronik/deCONZ/zcldb.txt 20:28:20:658 parent process /bin/sh 20:28:20:658 gw run mode: docker 20:28:20:658 GW sd-card image version file does not exist: /root/.local/share/dresden-elektronik/deCONZ/gw-version 20:28:20:659 DB sqlite version 3.27.2 20:28:20:659 DB PRAGMA page_count: 0 20:28:20:659 DB PRAGMA page_size: 4096 20:28:20:659 DB PRAGMA freelist_count: 0 20:28:20:659 DB file size 0 bytes, free pages 0 20:28:20:659 DB PRAGMA user_version: 0 20:28:20:659 DB upgrade to user_version 1 20:28:20:925 DB write sqlite user_version 1 20:28:20:937 DB PRAGMA user_version: 1 20:28:20:937 DB upgrade to user_version 2 20:28:20:961 DB write sqlite user_version 2 20:28:20:973 DB PRAGMA user_version: 2 20:28:20:973 DB upgrade to user_version 6 20:28:21:011 DB write sqlite user_version 6 20:28:21:022 DB PRAGMA user_version: 6 20:28:21:023 DB upgrade to user_version 7 20:28:21:045 DB write sqlite user_version 7 20:28:21:057 DB PRAGMA user_version: 7 20:28:21:057 DB cleanup 20:28:21:057 DB create temporary views 20:28:21:059 started websocket server at port 443 20:28:21:060 create default username and password 20:28:21:061 [INFO] - Found file containing button maps. Parsing data... 20:28:21:067 [INFO] - Button maps loaded. 20:28:21:068 dlg action: Read binding table 20:28:21:068 found node plugin: libde_rest_plugin.so - REST API Plugin 20:28:21:070 found node plugin: libde_signal_plugin.so - Signal Monitor Plugin 20:28:21:087 found node plugin: libstd_otau_plugin.so - STD OTAU Plugin This plugin does not support propagateSizeHints() 20:28:24:163 Device firmware version 0x26660700 ConBee II 20:28:24:176 unlocked max nodes: 200 20:28:24:289 Device protocol version: 0x010C 20:28:24:431 Device protocol version: 0x010C 20:28:25:838 GW update firmware found: /usr/share/deCONZ/firmware/deCONZ_ConBeeII_0x26660700.bin.GCF 20:28:25:838 GW firmware version: 0x26660700 20:28:25:838 GW firmware version is up to date: 0x26660700 20:28:26:283 Announced to internet https://phoscon.de/discover 20:28:30:583 invalid current channel 0 (TODO) 20:28:40:583 invalid current channel 0 (TODO) 20:28:41:084 Set bridgeid to 00212EFFFF07216A 20:28:50:583 invalid current channel 0 (TODO) 20:29:00:583 invalid current channel 0 (TODO) 20:29:10:583 invalid current channel 0 (TODO) 20:29:20:609 invalid current channel 0 (TODO) 20:29:30:583 invalid current channel 0 (TODO) 20:29:40:583 invalid current channel 0 (TODO) 20:29:50:583 invalid current channel 0 (TODO) 20:30:00:583 invalid current channel 0 (TODO) 20:30:10:583 invalid current channel 0 (TODO) 20:30:20:583 invalid current channel 0 (TODO) 20:30:30:583 invalid current channel 0 (TODO) 20:30:40:583 invalid current channel 0 (TODO) 20:30:50:583 invalid current channel 0 (TODO) 20:31:00:583 invalid current channel 0 (TODO) 20:31:10:583 invalid current channel 0 (TODO) 20:31:20:583 invalid current channel 0 (TODO) 20:31:30:583 invalid current channel 0 (TODO) 20:31:40:583 invalid current channel 0 (TODO) 20:31:50:583 invalid current channel 0 (TODO) 20:32:00:583 invalid current channel 0 (TODO) 20:32:10:583 invalid current channel 0 (TODO) 20:32:20:583 invalid current channel 0 (TODO) 20:32:25:583 GW firmware version: 0x26660700 20:32:25:583 GW firmware version is up to date: 0x26660700 20:32:30:583 invalid current channel 0 (TODO) 20:32:40:583 invalid current channel 0 (TODO) 20:32:50:583 invalid current channel 0 (TODO) 20:33:00:583 invalid current channel 0 (TODO) 20:33:10:583 invalid current channel 0 (TODO) 20:33:20:584 invalid current channel 0 (TODO) 20:33:30:583 invalid current channel 0 (TODO) 20:33:40:583 invalid current channel 0 (TODO) 20:33:50:583 invalid current channel 0 (TODO) 20:34:00:583 invalid current channel 0 (TODO) 20:34:10:584 invalid current channel 0 (TODO) 20:34:20:583 invalid current channel 0 (TODO) 20:34:30:583 invalid current channel 0 (TODO) 20:34:40:583 invalid current channel 0 (TODO) 20:34:50:583 invalid current channel 0 (TODO) 20:35:00:583 invalid current channel 0 (TODO) 20:35:10:583 invalid current channel 0 (TODO) 20:35:20:583 invalid current channel 0 (TODO) 20:35:29:411 device state timeout ignored in state 3 20:35:29:571 device state timeout ignored in state 3 20:35:29:731 device state timeout ignored in state 3 20:35:29:891 device state timeout ignored in state 3 20:35:30:052 device state timeout ignored in state 3 20:35:30:211 device state timeout ignored in state 3 20:35:30:371 device state timeout ignored in state 3 20:35:30:532 device state timeout ignored in state 3 20:35:30:583 invalid current channel 0 (TODO) 20:35:30:691 device state timeout ignored in state 3 20:35:30:852 device state timeout ignored in state 3 20:35:31:011 device state timeout ignored in state 3 This plugin does not support propagateSizeHints() 20:35:31:171 device state timeout (handled) 20:35:31:177 device disconnected reason: 1, index: 0 20:35:31:251 void zmMaster::handleStateIdle(zmMaster::MasterEvent) not connected goto OFF state 20:35:31:251 device state timeout ignored in state 1 20:35:32:083 start reconnect to network 20:35:32:083 wait reconnect 15 seconds 20:35:33:083 wait reconnect 14 seconds 20:35:34:084 wait reconnect 13 seconds 20:35:35:083 wait reconnect 12 seconds 20:35:36:083 wait reconnect 11 seconds 20:35:37:083 wait reconnect 10 seconds 20:35:37:333 failed to reconnect to network try=1 20:35:38:083 wait reconnect 9 seconds 20:35:39:084 wait reconnect 8 seconds 20:35:40:083 wait reconnect 7 seconds 20:35:41:084 wait reconnect 6 seconds 20:35:42:084 wait reconnect 5 seconds 20:35:42:583 failed to reconnect to network try=2 20:35:43:084 wait reconnect 4 seconds 20:35:44:083 wait reconnect 3 seconds 20:35:45:083 wait reconnect 2 seconds This plugin does not support propagateSizeHints() 20:35:46:084 wait reconnect 1 seconds 20:35:46:165 Device firmware version 0x26660700 ConBee II 20:35:46:171 unlocked max nodes: 200 20:35:46:284 Device protocol version: 0x010C 20:35:46:294 new node - ext: 0x00212effff07216a, nwk: 0x0000 20:35:46:363 Current channel 15 20:35:46:381 CTRL got nwk update id 2 20:35:46:388 CTRL ANT_CTRL 0x03 20:35:46:432 Device protocol version: 0x010C 20:35:46:533 CTRL ANT_CTRL 0x03 20:35:46:577 Device protocol version: 0x010C 20:35:46:680 CTRL ANT_CTRL 0x03 20:35:47:583 reconnect network done 20:35:56:585 saved node state in 0 ms 20:35:56:585 sync() in 0 ms 20:36:20:619 Device TTL 3553 s flags: 0x7 20:36:25:584 GW firmware version: 0x26660700 20:36:25:584 GW firmware version is up to date: 0x26660700 20:37:20:631 Device TTL 3493 s flags: 0x7 20:38:20:620 Device TTL 3433 s flags: 0x7 20:39:20:621 Device TTL 3373 s flags: 0x7 20:40:20:621 Device TTL 3313 s flags: 0x7 20:40:25:583 GW firmware version: 0x26660700 20:40:25:583 GW firmware version is up to date: 0x26660700 20:40:25:583 GW firmware version: 0x26660700 20:40:25:583 GW firmware version is up to date: 0x26660700 Quote Link to comment
vakilando Posted June 9, 2021 Share Posted June 9, 2021 2 hours ago, Hoddl said: [marthoc/deconz] Starting deCONZ... [marthoc/deconz] Current deCONZ version: 2.12.00 [marthoc/deconz] Web UI port: 80 [marthoc/deconz] Websockets port: 443 [marthoc/deconz] VNC Disabled irgendwas ist da faul.... Laut Log hast du Port 80 / 443.... (und VNC disabled) ABER laut Screenshot hast du Port 86... (VNC Port ist gesetzt, aber DECONZ_VNC_MODE = 1 sehe ich nicht) Port 80 ist schlecht, wenn Unraid auch auf Port 80 hört. Da der Docker im HOST mode läuft hat er die selbe IP wie Unraid. Quote Link to comment
Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 kann man den stick iregndwie reseten bez. auf werkseinstellung bringen? Der VNC mode ist auf 1 drinnen. Quote Link to comment
vakilando Posted June 9, 2021 Share Posted June 9, 2021 (edited) 19 minutes ago, Hoddl said: kann man den stick iregndwie reseten bez. auf werkseinstellung bringen? hmm, weiß ich nicht... rtfm... Du kannst den Stick in einem Windows Rechner mit der Phoscon App mal testen oder ein Firmware Update machen. Firmware Update geht mit dem mathoc docker auch aber nur so wie hier beschrieben: marthoc Firmware Update Hab ich schon 2 mal gemacht. Geht. Aber dafür muss dein Docker laufen... Hier sind weitere Installationsmethoden beschrieben: Update-deCONZ-manually Was für ein Port steht denn bei dir in der config.ini unter /mnt/appdata/dresden-elektronik/deCONZ? Ist dort Port 86 (wie im teplate) vermerkt oder auch 80 (wie im Log)? Meine: [http] appcache=true port=86 Edited June 9, 2021 by vakilando Infos hinzugefügt Quote Link to comment
Hoddl Posted June 9, 2021 Author Share Posted June 9, 2021 eine config.ini datei hab ich nicht. Quote Link to comment
vakilando Posted June 9, 2021 Share Posted June 9, 2021 Was hast du in dem Pfad (ggf. Screenshot)? Quote Link to comment
Hoddl Posted June 10, 2021 Author Share Posted June 10, 2021 du hast über all als Beschreibung "Variable" stehen - sind das wiklich alles Variablen? Quote Link to comment
vakilando Posted June 10, 2021 Share Posted June 10, 2021 Wie in meinem Screenshot zu sehen sind alles Variablen außer natürlich der erste Eintrag, das ist ein Pfad zum appdata Verzeichnis.Was hast du denn in dem appdata Pfad für Dateien bzw Unterverzeichnisse? Quote Link to comment
Hoddl Posted June 10, 2021 Author Share Posted June 10, 2021 na dann muss ich es noch mal komplett bauen 🙂 hab bei den ports ports benutzt 🙂 ich werde es morgen noch mal machen... vielen Dank schon mal für deine hilfe Quote Link to comment
Hoddl Posted June 11, 2021 Author Share Posted June 11, 2021 ich bekomme beim installieren folgende fehler meldung: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='deconz' --net='host' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" --device=/dev/ttyACMO 'marthoc/deconz' af8998861ab0e70326dcc53e8c17c569141f87a7d63a9d4ecdb769128bca0c4a docker: Error response from daemon: error gathering device information while adding custom device "/dev/ttyACMO": no such file or directory. Der Befehl ist fehlgeschlagen. ist das ACMO(O als buchstabe) oder ACM0 (null) Quote Link to comment
Hoddl Posted June 11, 2021 Author Share Posted June 11, 2021 hab es nun mit null gebaut... nun hat es geklappt nur ist das ergebniss komplett das gleiche wie schon oben beschrieben... der Port steht wieder auf 80 es gibt auch keine ini. Quote Link to comment
vakilando Posted June 11, 2021 Share Posted June 11, 2021 Das muss eine Null sein. Quote Link to comment
vakilando Posted June 11, 2021 Share Posted June 11, 2021 Was hast du in dem Pfad (ggf. Screenshot)? Das hast du noch immer nicht beantwortet... Quote Link to comment
Hoddl Posted June 11, 2021 Author Share Posted June 11, 2021 der pfad ist: /mnt/user/appdata/dresden-elektronik/deconz/ Quote Link to comment
vakilando Posted June 11, 2021 Share Posted June 11, 2021 der pfad ist: /mnt/user/appdata/dresden-elektronik/deconz/Und WAS hast du in dem Pfad für Dateien / Unterverzeichnisse?? Quote Link to comment
Hoddl Posted June 11, 2021 Author Share Posted June 11, 2021 da ist nichts drinnen Quote Link to comment
vakilando Posted June 11, 2021 Share Posted June 11, 2021 Das ist schlecht....Hast du das Verzeichnis unter appdata angelegt, oder war das der docker (Standard) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.