DrKrieger Posted June 15, 2021 Share Posted June 15, 2021 Since version 6.8.3 or so Unraid doesn't seem to report UPS stats correctly, causing a mild panic attack after a power outage and the server immediately shutting off (everything safe thankfully!). UPS is a CyberPower CP1500AVRLCD With all drives active running a parity check or running a video conversion it always reports the following: POWER UPS Load: 10.0 % - 90 Watts UPS status:Online Battery charge:100.0 Percent Runtime left:78.1 Minutes Nominal power:900 Watts It does pull the model and serial number so I know it's communicating, but the lack of load usage and actual graceful shutdown on power loss is a little concerning. Any idea or suggestions? Quote Link to comment
Frank1940 Posted June 15, 2021 Share Posted June 15, 2021 10 hours ago, DrKrieger said: Since version 6.8.3 or so Unraid doesn't seem to report UPS stats correctly, causing a mild panic attack after a power outage and the server immediately shutting off (everything safe thankfully!). UPS is a CyberPower CP1500AVRLCD Does this mean the server shutdown as soon as the utility power failed? If this is the case, I would first check to see that the server is plugged into a UPS Battery-protected outlet. Second thing would be to get a couple of lamps with 100W incandescent bulbs in them. Power the server down using the GUI. Now plug the lamps into the UPS protected outlets, turn lamps on, and pull the plug to the UPS. It should power the lamps for at least five to ten minutes. If not, replace the battery... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.