June 21, 20215 yr I'm new to unraid, but have installed a 500GB SSD for Cache. I setup a new share with my disks and the SSD was immediately filled. There are a ton or warning saying that the SSD Cache is full, but when I try to mover nothing happens. I've tried changing it to hourly, and manually selecting "move" but nothing happens. I've looked at lots of forum posts with the same issue, but none of the solutions work. I tried the Mover Tuning plugin and nothing changed. I also saw a post that said you can fix it but it's not in the GUI, then the instructions aren't clear how to fix it if you're not familiar with making changes outside the GUI. Am I doing something wrong or is this a common issue?
June 21, 20215 yr Community Expert Go to Tools-Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread.
June 21, 20215 yr Community Expert 57 minutes ago, unraiduser83332 said: Am I doing something wrong or is this a common issue? Common for people to do something wrong with this.
June 21, 20215 yr Author Double checked all these setting, and all were correct. Still full and not moving. I'll upload the diag. tower-diagnostics-20210621-1420.zip
June 21, 20215 yr Community Expert 11 minutes ago, JorgeB said: use 10G When you don't specify M or G, the default is K, so 1000 times larger than you expect.
June 21, 20215 yr Author 4 minutes ago, JorgeB said: Share floor is set to 10TB, remove 3 zeros, or use 10G I have 300-500GB Files, will that be a problem? For some reason I thought I have to have it half the size of the largest files (so maybe 300GB). It does seem to be moving now though! Can you help me understand why that was stopping it? Also THANK YOU! This is very helpful
June 21, 20215 yr Community Expert Twice the size of largest file is often recommended. I recommend not caching for files as large as you say you have. Unraid has no way to know how large a file will become when it chooses a disk for it. If a disk has more than Minimum, the disk can be chosen and if the file won't fit the write fails.
June 22, 20215 yr Author I changed these and the mover started to work but only moved 40 of 400GB of data from the Cache to the Array, now the Cache is stuck still being mostly full. Mover says it's running but no data is moved. Any ideas why this is still not moving over?
June 22, 20215 yr 56 minutes ago, unraiduser83332 said: Any ideas why this is still not moving over? Difficult to say, you can go to the Scheduler and enable the Mover logging. Then launch the Mover if it is not running. After some time, you can analyze the log to see what is happening or create a new diagnostics to share here for help.
Archived
This topic is now archived and is closed to further replies.