June 21, 20215 yr Good morning everyone, Recently my FCP posted this error: "Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged" I am attaching the log file per the message. I'm not sure if I'm posting the correct log, as I'm not sure how to extract the mcelog stated in FCP but I did go into "Tools" and grab the Diagnostics log download. Some things of note: - Recently upgraded the hardware from a z97 and i7-5775c to a B560 and i7-10700 , but maintained the same GTX 970 and drives - During upgrade, missing two SATA ports and waiting on SATA PCIe controller to add them back that were present via Unassigned Devices - Recently been trying to spin up VMs, which has resulted in a total lockup of the system to the point where the PLUGINS and VM page become completely unresponsive and will not load, and it also stops Docker. It shows that containers are running, but when you try to connect to Plex, for example, it will not connect and cannot find the host. Even restarting the container does not change it. Rebooting the entire system fixes everything. I am more than happy to provide anything else required. I am also ikyn#4444 on discord and am in the unraid "guild" on Discord. tower-diagnostics-20210620-1047.zip
June 21, 20215 yr Certain combinations of hardware will cause an mce when initializing the cores. This is happening to you and is quite safe to ignore. For the VMs (especially if they are using passthrough), you may need to reconfigure everything on them due to the differing hardware.
June 21, 20215 yr Author 5 minutes ago, Squid said: Certain combinations of hardware will cause an mce when initializing the cores. This is happening to you and is quite safe to ignore. For the VMs (especially if they are using passthrough), you may need to reconfigure everything on them due to the differing hardware. Thank you. So it is normal for a mis-configured VM to render Docker useless until reboot? I will see if I can re-create the error and then pull logs before reboot and post them it that will help. Edited June 21, 20215 yr by ikyn
Archived
This topic is now archived and is closed to further replies.