Since upgrading from 6.8(stable) to 6.9.2 my buddies system has been crashing a lot. Average uptime is between a week to maybe a month. I tried to help but im at a lost.

 

Anyways things we have tried is memtest and different HBA card. nothing is really pointing out, thought about downgrading but unsure what that would all break. Anyways I posted diagnostics of his system.

Sorry lack of information, just not sure what is useful.

 

i5 9600K ASUS TUF Z390 Pro Gaming lsi 9200-8i

 

 

 

lobot-diagnostics-20210625-1124.zip

Edited June 25, 20215 yr by scubieman

Not a reason for crashing but there are errors like these for multiple disks:

 

Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: attempting task abort!scmd(0x00000000cf5c076f), outstanding for 30333 ms & timeout 30000 ms
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: [sde] tag#1724 CDB: opcode=0x12 12 00 00 00 24 00
Jun 22 04:59:59 Lobot kernel: scsi target1:0:3: handle(0x000b), sas_address(0x4433221102000000), phy(2)
Jun 22 04:59:59 Lobot kernel: scsi target1:0:3: enclosure logical id(0x500605b00544d590), slot(1)
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: task abort: SUCCESS scmd(0x00000000cf5c076f)
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: Power-on or device reset occurred

 

Start by updating the LSI firmware, it's using a very old version, could also be a connection/power problem.

 

As for the crashing, enable syslog mirror to flash then post that log after a crash.

Just now, JorgeB said:

Not a reason for crashing but there are errors like these for multiple disks:

 

Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: attempting task abort!scmd(0x00000000cf5c076f), outstanding for 30333 ms & timeout 30000 ms
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: [sde] tag#1724 CDB: opcode=0x12 12 00 00 00 24 00
Jun 22 04:59:59 Lobot kernel: scsi target1:0:3: handle(0x000b), sas_address(0x4433221102000000), phy(2)
Jun 22 04:59:59 Lobot kernel: scsi target1:0:3: enclosure logical id(0x500605b00544d590), slot(1)
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: task abort: SUCCESS scmd(0x00000000cf5c076f)
Jun 22 04:59:59 Lobot kernel: sd 1:0:3:0: Power-on or device reset occurred

 

Start by updating the LSI firmware, it's using a very old version, could also be a connection/power problem.

 

As for the crashing, enable syslog mirror to flash then post that log after a crash.

thanks, ill report back.

@JorgeB here are some logs, i guess the syslog mirror to flash was on.  2 different logs on there. Flashing LSI now.

syslog

syslog (1)

Edited June 25, 20215 yr by scubieman

Not seeing anything out of the ordinary in those logs other than the already mentioned disk issues.