brimnac Posted July 8, 2021 Share Posted July 8, 2021 (edited) Hi! I've run into two simultaneous issues, and I'm stumped. Wanted to reach out to see if I could get a hand. A newer 8TB drive keeps becoming Disabled (sdi). Cache Drive 01 (sdc) in pool of two disappears when I stop the array to remove the drive Log fills to 100% quickly, which I believe it is related to #2 I've attached my diagnostics. I see access beyond end of device errors along with a few others, but I'm overwhelmed at where to begin or what to do. Like many, most of my home is run through unRAID, and when it's down I hear about it from everyone in the family! The system still runs, and if I reboot the cache drive works fine, all Dockers and VMs run. Edit: I've used unRAID a long time. I'm sure there are weird issues due to having essentially the same system for 8+ years. I've started over only a handful of times, so if there are other "issues" you see, please do bring them up! server-diagnostics-20210708-1231.zip Edited July 8, 2021 by brimnac Grammar, formatting. Quote Link to comment
JorgeB Posted July 8, 2021 Share Posted July 8, 2021 Cache device dropped offline: Jul 8 09:22:35 Server kernel: ata2: hard resetting link Jul 8 09:22:35 Server kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jul 8 09:22:35 Server kernel: ata2.00: failed to set xfermode (err_mask=0x1) Jul 8 09:22:35 Server kernel: ata2.00: disabled Looks more like a connection/power problem, replace/swap both cables, the related errors are what's causing the log to fill up. Disabled disk needs to be replaced: 197 Current_Pending_Sector -O--C- 081 081 000 - 9496 198 Offline_Uncorrectable ----C- 081 081 000 - 9496 Quote Link to comment
brimnac Posted July 9, 2021 Author Share Posted July 9, 2021 Thanks, dude. I'll check the cable for the cache drive and get the 8TB replaced. Appreciate it! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.