Hard drive not getting an ID

[m0ngr31]

I'm running into a strange issue I haven't seen before. I added a few unassigned drives and one of my other ones just disapeared after a reboot and won't show up anymore. It was showing up fine before, and even still shows under SCSI devices.

 

[7:0:7:0]	disk    ATA      ST2000LX001-1RG1 SDM1  /dev/sdk        -

 

I get this error in the syslog:

Jul 11 21:14:26 Gunhaver emhttpd: device /dev/sdk problem getting id
Jul 11 21:14:26 Gunhaver emhttpd: device /dev/sdk problem getting id

 

It seems like it was working until I deleted the partition on it using the tool from Unassigned Devices...

gunhaver-diagnostics-20210711-2125.zip

[JorgeB]

That disk is failing to initialize:

 

Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: Power-on or device reset occurred
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: Device offlined - not ready after error recovery
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: rejecting I/O to offline device
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Sense not available.
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Sense not available.
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] 0 512-byte logical blocks: (0 B/0 B)
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] 0-byte physical blocks
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Write Protect is off
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Mode Sense: 00 00 00 00
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Asking for cache data failed
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Assuming drive cache: write through
Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Attached SCSI disk

 

Try connecting it to the onboard SATA controller instead.

[m0ngr31]

Okay, I'll try that