January 18, 20233 yr Author 16 minutes ago, Furion said: Thanks for the reply (and all the work you for the community!). I'm not no - not using proxy or VPN (though i know i probably should be!). ok in that case my recommendation would be to raise an issue on the prowlarr github repo:- https://github.com/Prowlarr/Prowlarr/issues put as much detail in as you can.
February 10, 20233 yr Is there a roadmap to support VPN directly within the docker container. Right now I have to use passthroughvpn which sucks because it then cannot communicate with other dockers via host. I have to route via the internal docker 172.x IP which is not guaranteed to remain the same. I have to ensure that the dockers start with time delays to ensure they get IPs in sequence as expected. Having VPN support would be amazing.
February 10, 20233 yr Author 11 minutes ago, ados said: Is there a roadmap to support VPN directly within the docker container. this is never going to happen, sorry, its just too much effort to do this. 12 minutes ago, ados said: I have to route via the internal docker 172.x IP which is not guaranteed to remain the same. I have to ensure that the dockers start with time delays to ensure they get IPs in sequence as expected. Having VPN support would be amazing. why not simply point prowlarr at privoxy or microsocks?, its simple and works without all the faffing around with changing networks and incoming/outgoing ports.
February 10, 20233 yr Shame because its soo much better than Jackett. I will give it a go but I've tried in the past to use proxy sockets but my ISP blocks it as it only hides the DNS queries. I had to switch to Jackett VPN which works but I'm trying to switch Prowlarr. Edited February 10, 20233 yr by ados
February 22, 20233 yr Anyone else having an issue w/ their sonarr/radarr/prowlarr setup lately? Seems prowlarr made a change to require a username/password login and sonarr/radarr aren't playing nice with it.
February 22, 20233 yr 1 hour ago, mr-hexen said: Anyone else having an issue w/ their sonarr/radarr/prowlarr setup lately? Seems prowlarr made a change to require a username/password login and sonarr/radarr aren't playing nice with it. I’m not having any issues but also haven’t configured authentication yet. Hadn’t even noticed the change since I don’t often connect to the prowlarr webUI. Of course this means I can’t open the ui but I’m reluctant to setup authentication now.
February 22, 20233 yr Getting failures connecting to an indexer (r#*g), and can't quite decipher what's going on in the logs - is anyone able to help? Thanks! 2023-02-22 09:26:30.5|Warn|ProwlarrErrorPipeline|FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log above the ValidationFailure for more details [v1.2.2.2699] FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log above the ValidationFailure for more details at Prowlarr.Api.V1.ProviderControllerBase`3.VerifyValidationResult(ValidationResult validationResult, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 204 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderDefinition definition, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 195 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderResource providerResource) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 144 at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.SyncObjectResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeActionMethodAsync() at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task)
February 23, 20233 yr 8 hours ago, mr-hexen said: Anyone else having an issue w/ their sonarr/radarr/prowlarr setup lately? Seems prowlarr made a change to require a username/password login and sonarr/radarr aren't playing nice with it. Have been running the new auth on all *arrs for a few weeks now, no issues.
February 23, 20233 yr 3 minutes ago, tjb_altf4 said: Have been running the new auth on all *arrs for a few weeks now, no issues. Just curious if you had to do any configuration changes to Sonarr/Radarr after setting up the auth?
February 23, 20233 yr 1 minute ago, wgstarks said: Just curious if you had to do any configuration changes to Sonarr/Radarr after setting up the auth? I read about the auth changes coming and pre-emptively made sure all the *arrs were using it, everything worked like it did before. I'd double check if the API key was reset/changed if you are having connectivity issues.
February 27, 20233 yr Prowlarr is up and running. I am using Deluge VPN for torrents, but I can't seem to get it working with Usenet. Do I need a separate downloader set up for this? I have NZBGeek set up as an indexer and it tests out just fine.
February 28, 20233 yr On 2/22/2023 at 12:53 PM, NachoServer said: Getting failures connecting to an indexer (r#*g), and can't quite decipher what's going on in the logs - is anyone able to help? Thanks! 2023-02-22 09:26:30.5|Warn|ProwlarrErrorPipeline|FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log above the ValidationFailure for more details [v1.2.2.2699] FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log above the ValidationFailure for more details at Prowlarr.Api.V1.ProviderControllerBase`3.VerifyValidationResult(ValidationResult validationResult, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 204 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderDefinition definition, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 195 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderResource providerResource) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 144 at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.SyncObjectResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeActionMethodAsync() at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task) I'm having the same issue right now.
February 28, 20233 yr 7 hours ago, ps2sunvalley said: I'm having the same issue right now. Yep, been having same issue since last update
March 1, 20233 yr Prowlarr is up and running. I am using Deluge VPN for torrents, but I can't seem to get it working with Usenet. Do I need a separate downloader set up for this? I have NZBGeek set up as an indexer and it tests out just fine. Yes, deluge only does torrents, you’ll need something like NZBget for UsenetSent from my iPhone using Tapatalk
March 9, 20233 yr I am trying to connect sonarr to prowlarr, and I get the following error when I try to add sonarr. I dont understand the logfile at all to be frank. Request Failed. POST /api/v3/indexer/test: Object reference not set to an instance of an object System.NullReferenceException: Object reference not set to an instance of an object at Sonarr.Http.ClientSchema.SchemaBuilder.ReadFromSchema (System.Collections.Generic.List`1[T] fields, System.Type targetType) [0x0009b] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Http\ClientSchema\SchemaBuilder.cs:49 at Sonarr.Api.V3.ProviderResourceMapper`2[TProviderResource,TProviderDefinition].ToModel (TProviderResource resource) [0x000c8] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Api.V3\ProviderResource.cs:65 at Sonarr.Api.V3.Indexers.IndexerResourceMapper.ToModel (Sonarr.Api.V3.Indexers.IndexerResource resource) [0x00005] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Api.V3\Indexers\IndexerResource.cs:39 at Sonarr.Api.V3.ProviderModuleBase`3[TProviderResource,TProvider,TProviderDefinition].GetDefinition (TProviderResource providerResource, System.Boolean includeWarnings, System.Boolean validate) [0x00000] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Api.V3\ProviderModuleBase.cs:101 at Sonarr.Api.V3.ProviderModuleBase`3[TProviderResource,TProvider,TProviderDefinition].Test (TProviderResource providerResource) [0x00000] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Api.V3\ProviderModuleBase.cs:142 at Sonarr.Api.V3.ProviderModuleBase`3[TProviderResource,TProvider,TProviderDefinition].<.ctor>b__2_1 (System.Object x) [0x00000] in M:\BuildAgent\work\63739567f01dbcc2\src\Sonarr.Api.V3\ProviderModuleBase.cs:29 at Nancy.NancyModule+<>c__DisplayClass38_0`1[T].<Post>b__0 (System.Object args) [0x00047] in <prowalarrapikey>:0 at Nancy.NancyModule+<>c__DisplayClass40_0`1[T].<Post>b__0 (System.Object args, System.Threading.CancellationToken ct) [0x00047] in <prowalarrapikey>:0 at Nancy.Routing.Route`1[T].Invoke (Nancy.DynamicDictionary parameters, System.Threading.CancellationToken cancellationToken) [0x00017] in <prowalarrapikey>:0 at Nancy.Routing.DefaultRouteInvoker.Invoke (Nancy.Routing.Route route, System.Threading.CancellationToken cancellationToken, Nancy.DynamicDictionary parameters, Nancy.NancyContext context) [0x00086] in <prowalarrapikey>:0 at Nancy.Routing.DefaultRequestDispatcher.Dispatch (Nancy.NancyContext context, System.Threading.CancellationToken cancellationToken) [0x002b7] in <prowalarrapikey>:0 at Nancy.NancyEngine.InvokeRequestLifeCycle (Nancy.NancyContext context, System.Threading.CancellationToken cancellationToken, Nancy.Bootstrapper.IPipelines pipelines) [0x0011d] in <prowalarrapikey>:0 EDIT: I have found the issue. It was a simple case of an out of date docker container. Changing the repo from "arch-sonarr:v3" to "arch-sonarr:latest" upated the version number and fixed the connection. Edited March 9, 20233 yr by vulu
March 13, 20233 yr Hi, everything on Prowlarr was working great until today. Now I get this error message when I try to access it: database disk image is malformed database disk image is malformed Version 1.2.2.2699 Here's my log: Quote text error warn system array login at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task) SQL: ==== Begin Query Trace ==== QUERY TEXT: SELECT "IndexerStatus".* FROM "IndexerStatus" PARAMETERS: ==== End Query Trace ==== 2023-03-13 16:15:33,045 DEBG 'start-script' stdout output: [Fatal] ProwlarrErrorPipeline: Request Failed. GET /api/v1/indexerStatus [v1.2.2.2699] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryImpl[T](IDbConnection cnn, CommandDefinition command, Type effectiveType)+MoveNext() in /_/Dapper/SqlMapper.cs:line 1094 at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source) at Dapper.SqlMapper.Query[T](IDbConnection cnn, String sql, Object param, IDbTransaction transaction, Boolean buffered, Nullable`1 commandTimeout, Nullable`1 commandType) in /_/Dapper/SqlMapper.cs:line 734 at NzbDrone.Core.Datastore.SqlMapperExtensions.Query[T](IDatabase db, String sql, Object param) in D:\a\1\s\src\NzbDrone.Core\Datastore\Extensions\SqlMapperExtensions.cs:line 17 at NzbDrone.Core.Datastore.BasicRepository`1.Query(SqlBuilder builder) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 71 at NzbDrone.Core.ThingiProvider.Status.ProviderStatusServiceBase`2.GetBlockedProviders() in D:\a\1\s\src\NzbDrone.Core\ThingiProvider\Status\ProviderStatusServiceBase.cs:line 45 at lambda_method33(Closure , Object , Object[] ) at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.SyncObjectResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeActionMethodAsync() at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task) SQL: ==== Begin Query Trace ==== QUERY TEXT: SELECT "IndexerStatus".* FROM "IndexerStatus" PARAMETERS: ==== End Query Trace ==== I tried to uninstall binhex-prowlarr and reinstall, but I still get this error. Any way to fix this? I don't mind starting Prowlarr again from scratch but I don't know enough about Unraid/Docker/databases to fix this without help.
March 15, 20233 yr On 3/14/2023 at 3:20 AM, C-Dub said: I don't mind starting Prowlarr again from scratch but I don't know enough about Unraid/Docker/databases to fix this without help. 1. Stop container 2. Backup Prowlarr appdata folder 3. Delete everything in prowlarr appdata folder 4. Start container you can also uninstall container after step 1 and reinstall it after step 3
March 22, 20233 yr My unraid/plex setup started giving me errors from this program. Not sure what need to do to try and fix this. Unable to connect to indexer: The proxy tunnel request to proxy 'http://10.0.1.100:8118/' failed with status code '404'."
March 22, 20233 yr 7 hours ago, rmilyard said: My unraid/plex setup started giving me errors from this program. Not sure what need to do to try and fix this. Unable to connect to indexer: The proxy tunnel request to proxy 'http://10.0.1.100:8118/' failed with status code '404'." Still not sure what is happening. Here is log: prowlarr.txt
March 23, 20233 yr Author 10 hours ago, rmilyard said: The proxy tunnel request to proxy 'http://10.0.1.100:8118/' the proxy is down, i assume you have configured prowlarr to use privoxy, and i would further assume privoxy is not working, so go check the logs for privoxy.
March 23, 20233 yr 5 hours ago, binhex said: the proxy is down, i assume you have configured prowlarr to use privoxy, and i would further assume privoxy is not working, so go check the logs for privoxy. I didn't setup privoxy. I have binhex-delugevpn setup.
March 23, 20233 yr Author I didn't setup privoxy. I have binhex-delugevpn setup.Yeah and you have configured prowlarr to use privoxy which is included in delugevpn, right?Sent from my 22021211RG using Tapatalk
September 16, 20232 yr For some reason, the docker seems to be running, though I can't access it using the http://localip:9696 address or even https://localip:9696. And when I try from one of the web apps to connect to it, it isn't working now, either. What info do I need to post to help troubleshoot? PS: tried rolling back to a version from 6 days ago. PS2: So on a whim, I rolled back even further and it started to work again. Seems that the current or latest version is not working, at least for me. Any ideas on what might be the issue are welcome. Edited September 16, 20232 yr by NMGMarques
September 17, 20232 yr On 9/16/2023 at 1:02 PM, NMGMarques said: For some reason, the docker seems to be running, though I can't access it using the http://localip:9696 address or even https://localip:9696. And when I try from one of the web apps to connect to it, it isn't working now, either. What info do I need to post to help troubleshoot? PS: tried rolling back to a version from 6 days ago. PS2: So on a whim, I rolled back even further and it started to work again. Seems that the current or latest version is not working, at least for me. Any ideas on what might be the issue are welcome. i'm in the same boat, seems to load a JSON file or something?
September 17, 20232 yr 1 hour ago, gellux said: i'm in the same boat, seems to load a JSON file or something? I'm about as skilled at web apps and coding as a potato. So I guess I'll be stuck on this version until someone posts a fixed version.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.