HP ProLiant ML310e LSI card drives not showing up in unraid

[mr.x]

I bought a LSI card and migrated to a HP ProLiant ML310e.  The drives connected to the LSI card show up in the boot screen however, the drives are not showing up in unraid.  I have enabled in bios under sata controller AHCI and drive cache.   See below for syslogs.  Can someone please help?

 

LSI Card: Supermicro AOC-S2308L-L8e

DMAR: DRHD: handling fault status reg 2
kernel: DMAR: [DMA Write] Request device [07:00.0] PASID ffffffff fault addr ffc78000 [fault reason 12] non-zero reserved fields in PTE
kernel: ata1: SATA link down (SStatus 0 SControl 300)
kernel: ata2: SATA link down (SStatus 0 SControl 300)
kernel: ata3: SATA link down (SStatus 0 SControl 300)
kernel: ata4: SATA link down (SStatus 0 SControl 300)
kernel: ata5: SATA link down (SStatus 0 SControl 300)
kernel: ata6: SATA link down (SStatus 0 SControl 300)
kernel: mpt2sas_cm0: config_request: manufacturing(0), action(0), form(0x00000000), smid(10129)
kernel: mpt2sas_cm0: _config_request: command timeout
kernel: mpt2sas_cm0: Command Timeout
kernel: mf:
kernel:     
kernel: 04000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 09000000 
kernel: 00000000 
kernel: d3000000 
kernel: 
kernel:     
kernel: ffffffff 
kernel: ffffffff 
kernel: 00000000 
kernel: 
kernel: mpt2sas_cm0: sending diag reset !!
kernel: mpt2sas_cm0: diag reset: SUCCESS
kernel: mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
kernel: DMAR: DRHD: handling fault status reg 2
kernel: DMAR: [DMA Write] Request device [07:00.0] PASID ffffffff fault addr ffc78000 [fault reason 12] non-zero reserved fields in PTE
kernel: mpt2sas_cm0: config_request: manufacturing(0), action(0), form(0x00000000), smid(10129)
kernel: mpt2sas_cm0: _config_request: command timeout
kernel: mpt2sas_cm0: Command Timeout
kernel: mf:
kernel:     
kernel: 04000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 09000000 
kernel: 00000000 
kernel: d3000000 
kernel: 
kernel:     
kernel: ffffffff 
kernel: ffffffff 
kernel: 00000000 
kernel: 
kernel: mpt2sas_cm0: _config_request: attempting retry (1)
kernel: DMAR: DRHD: handling fault status reg 2
kernel: DMAR: [DMA Write] Request device [07:00.0] PASID ffffffff fault addr ffc78000 [fault reason 12] non-zero reserved fields in PTE
kernel: mpt2sas_cm0: config_request: manufacturing(0), action(0), form(0x00000000), smid(10129)
kernel: mpt2sas_cm0: _config_request: command timeout
kernel: mpt2sas_cm0: Command Timeout
kernel: mf:
kernel:     
kernel: 04000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 00000000 
kernel: 09000000 
kernel: 00000000 
kernel: d3000000 
kernel: 
kernel:     
kernel: ffffffff 
kernel: ffffffff 
kernel: 00000000 
kernel: 
kernel: mpt2sas_cm0: _config_request: attempting retry (2)
kernel: DMAR: DRHD: handling fault status reg 2
kernel: DMAR: [DMA Write] Request device [07:00.0] PASID ffffffff fault addr ffc78000 [fault reason 12] non-zero reserved fields in PTE
kernel: mpt2sas_cm0: config_request: manufacturing(0), action(0), form(0x00000000), smid(10129)
kernel: mpt2sas_cm0: _config_request: command timeout
kernel: mpt2sas_cm0: Command Timeout
kernel: mf:

Edited July 25, 2021 by mr.x

[mr.x]

I disabled intel VDT in bios and unraid is now able to detect the drives and start the array.  Any ideas?  Unraid driver is interfering with intel VDT?  Does this mean I won't be able to spin up any VM's?

[JorgeB]

11 hours ago, mr.x said:

Unraid driver is interfering with intel VDT?

Not normal with an LSI, you can read or ask in the thread below to see if there are any known issues/workarounds for that server: