Firefox browser said it needed a restart, so i closed it and now i cant get bk into the GUI or access the server in any way other than through the command prompt. i tried to restart and a full shutdown even pulled the discs to make sure it wasn't the vm starting and nothing. its IP shows up in my network but none of the SMB shares are just empty. i can access everything else from the web on unraid im writing this on it now. But I can't access unraid in any way not in the command.

 

when unraid starts it pops up Firefox window with:

 

Unable to connect

Firefox can’t establish a connection to the server at localhost.

    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer’s network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

 

as does it from all other computers.

stores.r.us-diagnostics-20210729-1330.zip

Edited July 30, 20213 yr by Gothix
added stuff

It is some sort of settings issue really wish somebody would respond to either of my help requests....... 

Delete the contents of /config/ssh and /config/ssl on the flash drive and reboot

3 hours ago, Squid said:

Delete the contents of /config/ssh and /config/ssl on the flash drive and reboot

Thank you going to try this now

10 minutes ago, Gothix said:

Thank you going to try this now

Omg thank you it works 

Is there anything I need to do before starting the system up? 

You mentioned using a new install on that other thread.

 

5 minutes ago, Gothix said:

Is there anything I need to do before starting the system up? 

Is this the original install or a new one?

6 minutes ago, trurl said:

You mentioned using a new install on that other thread.

 

Is this the original install or a new one?

This is the original with the SSH and SSL folders removed it's up and running but I have not started the array yet

If your disk assignments are correct start the array.

2 minutes ago, trurl said:

If your disk assignments are correct start the array.

Everything started up I'm not sure if everything's working fine seems to be.

Is there anybody who can tell me what I broke so I don't break it again

Make sure you keep a current backup of flash. You can download a zipped backup at Main - Boot Device - Flash - Flash Backup or use the My Servers plugin to backup to Limetech cloud.

I had the same problem when I added a nvme in my system.

In my case, I found out that Unassigned Devices plugins were messing up something and not letting the Web GUI boot.

I access ssh (ssh root@SERVERIP)

 

I manually delete them in the flashdrive 

 

rm /boot/config/plugins/unassigned.devices/*
rmdir /boot/config/plugins/unassigned.devices
rm /boot/config/plugins/unassigned.devices-plus/* 
rmdir /boot/config/plugins/unassigned.devices-plus
rm /boot/config/plugins/unassigned.device*

 

 

I also had to manually delete all removed plugins too before re-instaling the Unassigned devices back. 

 

rm /boot/config/plugins-removed/*

 

After it, I reboot the system.

It came back to normal and I reinstalled the Unassigned devices plugins back.

 

I hope it helps.

 

All the best,

 

Lucas