Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[SOLVED] Unraid freezes, can't access via WebGUI or SSH, have to hard restart

Featured Replies

This just started happening 2 days ago. No major changes, just a lot of access setting up a Roon server (on a different machine) so there has been lots of read access. It starts back up in regular mode (as opposed to safe mode) I have no idea where to look for the issue. Log and diagnostics attached. Any help appreciated.

 

I (finally) replaced the drive with the errors and all issues have been resolved, I have not had any problems now for 30+ day.

nas-diagnostics-20210729-2215.zip nas-syslog-20210730-0516.zip

Edited by denzo
Solved

You may need to set up your syslog archiving to the flash disk. This only shows log since the last reboot.

  • Author

Here is a syslog after the latest crash.

syslog

  • Community Expert

The diagnostics you ported earlier had this in the SMART report for disk6

197 Current_Pending_Sector  -O---K   100   100   000    -    12600

so I would say that disk is very sick and needs to be replaced.

 

The syslog also backs this up with lots of errors being reported for that drive.

  • Author
1 hour ago, itimpi said:

The diagnostics you ported earlier had this in the SMART report for disk6


197 Current_Pending_Sector  -O---K   100   100   000    -    12600

so I would say that disk is very sick and needs to be replaced.

 

The syslog also backs this up with lots of errors being reported for that drive.

Thanks for the reply, looks like you are correct. I ran a SMART test (attached). Looking at the report it says "Error 161 [0] occurred at disk power-on lifetime: 36091 hours (1503 days + 19 hours)" .... this drive was purchased new by me in December 2020, how could it have so many hours on it, any ideas?

WDC_WD80EZZX-11CSGA0_VKKP2SRX-20210801-0213.txt

  • Community Expert
22 minutes ago, denzo said:

this drive was purchased new by me in December 2020, how could it have so many hours on it, any ideas?

No idea unless it was not really new :(  I notice that even running that test made the number or Pending Sectors go up significantly.

  • Author
Just now, itimpi said:

No idea unless it was not really new :(  I notice that even running that test made the number or Pending Sectors go up significantly.

This drive was "shucked" from a WD Easystore, I wonder if WD puts refurbs in some of those?

3 hours ago, denzo said:

This drive was "shucked" from a WD Easystore, I wonder if WD puts refurbs in some of those?

Normally when a manufacturer refurbs a drive they reset the SMART stats. It's more likely a return fraudulently sold as new.

  • denzo changed the title to [SOLVED] Unraid freezes, can't access via WebGUI or SSH, have to hard restart

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.