August 4, 20214 yr So I installed unraid today on a new machine I built just to run vm's BUT for whatever reason when I power on the machine and boot to the USB stick it doesn't detect my NIC - The nic is the onboard one on my z590 phantom gaming 4 ASRock board I installed Windows to check and make sure stuff works ... The I rebooted forget to boot to the USB and rebooted and booted to the USB and the nic registered and I had an IP - wonderful - I rebooted from unraid command line and booted back into unraid and no IP was assigned .. I know the cable and port are good - I updated the mainbaord firmware via the net I read somewhere about cold boots and warm boots and how that impacted access to the nic I've scrubbed through the bios - disabled the wireless networking on the bios - ensured the nic is enabled Any help would be very much appreciated!!!
August 4, 20214 yr Author Just confirmed - booting to windows and then rebooting without powering down and booting into unraid assigns me a ip and the nic works
August 4, 20214 yr You can generate diagnostics at the console by typing .... diagnostics (super original ) You can then recover the file on the flashdrive and attach it on your next post.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.