August 9, 20214 yr Hi I know this has been asked before but nothing from those posts have worked. I am using Unraid Version: 6.8.3. When I plug in my USB drive, formatted as Fat32. I cannot share/ access the drive. System logs: Aug 9 10:38:02 Tower kernel: usb 1-5: new high-speed USB device number 3 using xhci_hcd Aug 9 10:38:02 Tower kernel: usb-storage 1-5:1.0: USB Mass Storage device detected Aug 9 10:38:02 Tower kernel: scsi host5: usb-storage 1-5:1.0 Aug 9 10:38:03 Tower kernel: scsi 5:0:0:0: Direct-Access KIOXIA TransMemory 1.00 PQ: 0 ANSI: 4 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: Attached scsi generic sg5 type 0 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] 60549120 512-byte logical blocks: (31.0 GB/28.9 GiB) Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Write Protect is off Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Aug 9 10:38:03 Tower kernel: sdf: sdf1 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Attached SCSI removable disk Aug 9 10:38:04 Tower unassigned.devices: Disk with serial 'TransMemory_0022CFF6BD70C420E5EE3F4C', mountpoint 'JAR' is set as pass through.
August 9, 20214 yr 35 minutes ago, Jarrodr said: Hi I know this has been asked before but nothing from those posts have worked. I am using Unraid Version: 6.8.3. When I plug in my USB drive, formatted as Fat32. I cannot share/ access the drive. System logs: Aug 9 10:38:02 Tower kernel: usb 1-5: new high-speed USB device number 3 using xhci_hcd Aug 9 10:38:02 Tower kernel: usb-storage 1-5:1.0: USB Mass Storage device detected Aug 9 10:38:02 Tower kernel: scsi host5: usb-storage 1-5:1.0 Aug 9 10:38:03 Tower kernel: scsi 5:0:0:0: Direct-Access KIOXIA TransMemory 1.00 PQ: 0 ANSI: 4 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: Attached scsi generic sg5 type 0 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] 60549120 512-byte logical blocks: (31.0 GB/28.9 GiB) Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Write Protect is off Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Aug 9 10:38:03 Tower kernel: sdf: sdf1 Aug 9 10:38:03 Tower kernel: sd 5:0:0:0: [sdf] Attached SCSI removable disk Aug 9 10:38:04 Tower unassigned.devices: Disk with serial 'TransMemory_0022CFF6BD70C420E5EE3F4C', mountpoint 'JAR' is set as pass through. Click on the three gears 'Settings' icon and turn off 'Passed Through".
August 9, 20214 yr Author Thanks so much. I've been breaking my head. Now I see it. But I get this now. Copying from a shared to usb.
August 11, 20214 yr Community Expert That's normal if using an fs like exFAT, it doesn't support permissions, you can "skip all" or just disable "preserve attributes" for the operation.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.