August 15, 20214 yr Not sure what happened or which/what logs to look into (just started running Unraid a couple of weeks ago). Temp is back down to the usual range, just wanted to check if this is something I should worry about or if someone else has run into something similar. Currently I have 2 Samsung 970 1tb NVME as my cache, one inside the motherboard with a heatsink and one just plugged into it. Usually the one that's plugged in will get hotter but within an acceptable range (50~60), while the one with the heatsink will be pretty stable in the low 40s. Hooked up a couple more SSD's from an old build to use as an additional cache pool, mounted one to pass over the files as usual using Krusader and in a couple minutes the NVME with the heatsink apparently reached 83C which scared me, the other one stayed at 50~60 as usual. It wouldn't change for about 10 minutes while I was googling around for anything similar or an answer, then it came back down to 45C and stayed there so far. Could it have bugged out on reading the temp on that NVME? I did add another expansion card for the new SSDs, could that add more strain to the motherboard/cause it to heat up more than usual? Most results I found said those temps would just throttle the drive, but now I'm worried of it getting and staying that high again while I can't access the server to shut it down just to be safe.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.