Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

(Solved) My Servers - Showing Unavailable

Featured Replies

My router went through a reset last night and even after renewing the DNS and restarting the UNRAID api, I still cannot get it to show in My Servers.

1 hour ago, Lucky3058 said:

My router went through a reset last night


What changed? Did the server's IP address or your WAN IP change? (honestly, it shouldn't cause a problem either way, just wondering what the significance is of the "reset")

 

1 hour ago, Lucky3058 said:

even after renewing the DNS and restarting the UNRAID api, I still cannot get it to show in My Servers.

 

Let's reboot Unraid, just to start fresh after the reset.

 

Can you show a screenshot of what you see when you click your username in the UPC (in the upper right corner of the webgui)

 

Also show a screenshot of this server in the My Servers Dashboard: https://forums.unraid.net/my-servers/

 

  • Author

Rebooted the server just now. Screenshots attached. Still not showing available in My Servers.

PLEXGUI.jpg

PLEXMyServers.jpg

Thanks, that was super helpful. Would you please check the My Servers Dashboard again, you should now have a Local Access url instead of "Access Unavailable"

  • Author

Yeap just checked this morning and looks like this is fixed, what did you have to do?

We had bug affecting servers that did not have SSL enabled, your router change was just a coincidence :) Thanks for reporting it.

  • ljm42 changed the title to (Solved) My Servers - Showing Unavailable
  • Author

ljm42 - So it shows correct under My Servers however when I click on local access to go to my custom URL it does not show the GUI page.

8 minutes ago, Lucky3058 said:

ljm42 - So it shows correct under My Servers however when I click on local access to go to my custom URL it does not show the GUI page.

 

What url do you normally use to access the system, and what url is it offering you?  (replace abc123.unraid.net with the text "hash.unraid.net", we don't want to post your personal hash url publicly). 

 

Exactly what error message do you get when you click the url it offers you? A screenshot is fine too.

 

Also, please upload your diagnostics (from Tools -> Diagnostics)

  • Author

Right now I am using the host IP of the server to get into the GUI. I used to use hash.unraid.net. And the error page states site cannot be reached (DNS_PROBE_FINISHED_NXDOMAIN).

tower-diagnostics-20210830-1515.zip

I suspect that after the changes with your router, you might have issues with DNS Rebinding.

 

Please open a web terminal and type:

  host rebindtest.unraid.net

 

If the result looks like this, then all is good:

root@Tower:~# host rebindtest.unraid.net
rebindtest.unraid.net has address 192.168.42.42

If you get something else then you need to figure out how to disable DNS Rebinding on your new router.

oh sorry, I just remembered Unraid 6.9.2 doesn't have the "host" command. Let's use "ping" instead:

ping rebindtest.unraid.net

 

after a few seconds you can press "ctrl c". If DNS Rebinding is NOT a problem you will see it resolve to 192.168.42.42:

root@ODROID:~# ping rebindtest.unraid.net
PING rebindtest.unraid.net (192.168.42.42) 56(84) bytes of data.
^C
--- rebindtest.unraid.net ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1044m

 

If it does not resolve to 192.168.42.42 then you need to figure out how to disable DNS Rebinding on your new router.

  • Author

Forgot about the DNS rebind protection. Verizon reset it back to on by default on the Router FW upgrade. Disabled it again, ran ping a second time and all good to go. Might want to let others know who have Verizon Fios with a G3100 router that also gets the upgrade to go back and re-disable that feature.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.