August 22, 20214 yr Sometimes when I reboot my server it comes up in a video resolution not supported by the monitor. I have two questions. 1. Is there a way to fix the video resolution so it always starts up using the same resolution? 2. Once the server is started how do you change the resolution of the screen without rebooting the server? Thanks in advance. Edited August 23, 20214 yr by csmccarron
August 23, 20214 yr Community Expert Not sure there is a way to do either of the things you asked about Would like to be proved wrong
August 23, 20214 yr Legacy boot *should* give a stock resolution of 800x600 IIRC. UEFI boot will tend to use the highest resolution your monitor says it supports.
August 24, 20214 yr Author So there is no way to force it to use a specific resolution everytime it boots?
August 26, 20214 yr Author The monitor that was attached only supported 1366 x 768@60 Hz and unRaid booted to a resolution greater than 1920x1080. Is there anyway to fix the resolution so it always starts at 1920x1080? last_boot.log
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.