NetApp DS4486 - Errors in log, no temps or smart reports


Recommended Posts

I'm using an LSI 9206-16e HBA to connect to the netapp. There are 48 4TB disks, all formatted to 512b sectors and recognized by unassigned devices. The LSI card has been updated to the latest P20 firmware. I was unable to get lsiutility to work, so I couldn't further check the configuration on the card. If there is a way to do this within unraid console? That would be pretty epic and I would definitely like to know.

 

I have had random issues with the drive mount button being greyed out, not being able to unmount a drive (its share doesn't show in exportfs -v), so I don't think anything could be attached to its filesystem.

 

I have even lost the drive name_serial and then it will randomly show back up again.

 

I am unable to do a smart test or see temps of the drives

 

I currently have most drives formatted to NTFS, but I am thinking maybe XFS would be better. They are just used for individual storage on each drive and backup isn't important.

 

I have attached a system log error output from unraid. A lot of this with the "jbod" is new to me. Any direction here would be great.

 

Aug 21 18:19:10 Tower kernel: blk_update_request: I/O error, dev sdv, sector 32768 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 18:19:12 Tower kernel: blk_update_request: I/O error, dev sdv, sector 32768 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:19:12 Tower kernel: Buffer I/O error on dev sdv2, logical block 0, async page read
Aug 21 18:19:12 Tower kernel: blk_update_request: I/O error, dev sdv, sector 7814033280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 18:19:12 Tower kernel: blk_update_request: I/O error, dev sdv, sector 7814033280 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:19:12 Tower kernel: Buffer I/O error on dev sdv2, logical block 976750064, async page read
Aug 21 18:20:36 Tower kernel: blk_update_request: I/O error, dev sdw, sector 32768 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 18:20:37 Tower kernel: blk_update_request: I/O error, dev sdw, sector 32768 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:20:37 Tower kernel: Buffer I/O error on dev sdw2, logical block 0, async page read
Aug 21 18:20:37 Tower kernel: blk_update_request: I/O error, dev sdw, sector 7814033280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 18:20:37 Tower kernel: blk_update_request: I/O error, dev sdw, sector 7814033280 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:20:37 Tower kernel: Buffer I/O error on dev sdw2, logical block 976750064, async page read
Aug 21 18:20:51 Tower kernel: blk_update_request: I/O error, dev sdx, sector 32768 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 18:20:52 Tower kernel: blk_update_request: I/O error, dev sdx, sector 32768 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:20:52 Tower kernel: Buffer I/O error on dev sdx2, logical block 0, async page read
Aug 21 18:20:52 Tower kernel: blk_update_request: I/O error, dev sdx, sector 7814033280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 18:20:52 Tower kernel: blk_update_request: I/O error, dev sdx, sector 7814033280 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:20:52 Tower kernel: Buffer I/O error on dev sdx2, logical block 976750064, async page read
Aug 21 18:21:16 Tower kernel: blk_update_request: I/O error, dev sdy, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 18:21:17 Tower kernel: blk_update_request: I/O error, dev sdy, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:21:17 Tower kernel: Buffer I/O error on dev sdy1, logical block 0, async page read
Aug 21 18:21:17 Tower kernel: blk_update_request: I/O error, dev sdy, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 18:21:17 Tower kernel: blk_update_request: I/O error, dev sdy, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 18:21:17 Tower kernel: Buffer I/O error on dev sdy1, logical block 976754160, async page read
Aug 21 19:11:12 Tower kernel: blk_update_request: I/O error, dev sdz, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 19:11:12 Tower kernel: blk_update_request: I/O error, dev sdz, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:11:12 Tower kernel: Buffer I/O error on dev sdz1, logical block 0, async page read
Aug 21 19:11:12 Tower kernel: blk_update_request: I/O error, dev sdz, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:11:12 Tower kernel: blk_update_request: I/O error, dev sdz, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:11:12 Tower kernel: Buffer I/O error on dev sdz1, logical block 976754160, async page read
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdae, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdae, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdae, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdag, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdag, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdag, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdaf, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdau, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdal, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdaf, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdaf, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdau, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdau, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: blk_update_request: I/O error, dev sdal, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdal, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdat, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdbj, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdbd, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdao, logical block 976754624, async page read
Aug 21 19:18:50 Tower kernel: Buffer I/O error on dev sdbg, logical block 976754624, async page read
Aug 21 19:18:57 Tower kernel: blk_update_request: I/O error, dev sdaz, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:57 Tower kernel: blk_update_request: I/O error, dev sdaz, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:57 Tower kernel: Buffer I/O error on dev sdaz, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdad, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdad, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdad, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdbb, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdam, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdbb, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdbb, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdam, sector 7814036992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdam, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdbk, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: blk_update_request: I/O error, dev sdbe, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdbk, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdbe, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdan, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdaq, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdbm, logical block 976754624, async page read
Aug 21 19:18:58 Tower kernel: Buffer I/O error on dev sdbf, logical block 976754624, async page read
Aug 21 20:22:29 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210992 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
Aug 21 20:22:30 Tower ntfs-3g[31293]: ntfs_attr_pread error reading '/plots/plot-k32-2021-08-06-06-39-fd0b4152cc6f1ed9ba0a099b9cf4be1f9d907b6922f77fe040f5e6aee3dc70cc.plot' at offset 55803117568: 131072 <> -1: Input/output error
Aug 21 20:22:30 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210736 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:22:30 Tower kernel: Buffer I/O error on dev sdx2, logical block 41022246, async page read
Aug 21 20:22:30 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210480 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 20:22:30 Tower ntfs-3g[31293]: ntfs_attr_pread error reading '/plots/plot-k32-2021-08-06-06-39-fd0b4152cc6f1ed9ba0a099b9cf4be1f9d907b6922f77fe040f5e6aee3dc70cc.plot' at offset 55802986496: 4096 <> -1: Input/output error
Aug 21 20:22:30 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210480 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:22:30 Tower kernel: Buffer I/O error on dev sdx2, logical block 41022214, async page read
Aug 21 20:22:30 Tower ntfs-3g[31293]: ntfs_attr_pread error reading '/plots/plot-k32-2021-08-06-06-39-fd0b4152cc6f1ed9ba0a099b9cf4be1f9d907b6922f77fe040f5e6aee3dc70cc.plot' at offset 55802986496: 4096 <> -1: Input/output error
Aug 21 20:22:30 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210480 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:22:30 Tower kernel: Buffer I/O error on dev sdx2, logical block 41022214, async page read
Aug 21 20:22:30 Tower ntfs-3g[31293]: ntfs_attr_pread error reading '/plots/plot-k32-2021-08-06-06-39-fd0b4152cc6f1ed9ba0a099b9cf4be1f9d907b6922f77fe040f5e6aee3dc70cc.plot' at offset 55802986496: 4096 <> -1: Input/output error
Aug 21 20:22:30 Tower kernel: blk_update_request: I/O error, dev sdx, sector 328210480 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:22:30 Tower kernel: Buffer I/O error on dev sdx2, logical block 41022214, async page read
Aug 21 20:53:11 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 3072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 20:53:13 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 3072 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:53:13 Tower kernel: Buffer I/O error on dev sdbq1, logical block 128, async page read
Aug 21 20:54:21 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 3072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 20:54:23 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 3072 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 20:54:23 Tower kernel: Buffer I/O error on dev sdbp1, logical block 128, async page read
Aug 21 22:28:01 Tower kernel: blk_update_request: I/O error, dev sdy, sector 976756264 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 22:28:01 Tower unassigned.devices: Error: shell_exec(/bin/df '/mnt/disks/netapp_5' --output=size,used,avail | /bin/grep -v '1K-blocks' 2>/dev/null) took longer than 2s!
Aug 21 22:28:02 Tower kernel: blk_update_request: I/O error, dev sdy, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 22:28:02 Tower kernel: Buffer I/O error on dev sdy1, logical block 122094277, async page read
Aug 21 22:29:38 Tower kernel: blk_update_request: I/O error, dev sdw, sector 1069489368 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
Aug 21 22:29:38 Tower unassigned.devices: Error: shell_exec(/bin/df '/mnt/disks/netapp_2' --output=size,used,avail | /bin/grep -v '1K-blocks' 2>/dev/null) took longer than 2s!
Aug 21 22:29:39 Tower ntfs-3g[2313]: ntfs_attr_pread error reading '/plots/plot-k32-2021-07-11-22-04-c57332a1f059d6d083fd731ba7acdb73fb8518907058d528454a16605b7acb19.plot' at offset 0: 131072 <> -1: Input/output error
Aug 21 22:29:39 Tower kernel: blk_update_request: I/O error, dev sdw, sector 1069489368 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 22:29:39 Tower kernel: Buffer I/O error on dev sdw2, logical block 133682075, async page read
Aug 21 22:29:39 Tower ntfs-3g[2313]: ntfs_attr_pread error reading '/plots/plot-k32-2021-07-11-22-04-c57332a1f059d6d083fd731ba7acdb73fb8518907058d528454a16605b7acb19.plot' at offset 0: 4096 <> -1: Input/output error
Aug 21 22:29:39 Tower kernel: blk_update_request: I/O error, dev sdw, sector 1069489368 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 22:29:39 Tower kernel: Buffer I/O error on dev sdw2, logical block 133682075, async page read
Aug 21 22:53:08 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 3072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 22:53:08 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 3072 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 22:53:08 Tower kernel: Buffer I/O error on dev sdbq1, logical block 128, async page read
Aug 21 22:53:16 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 3072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 22:53:18 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 3072 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 22:53:18 Tower kernel: Buffer I/O error on dev sdbp1, logical block 128, async page read
Aug 21 23:41:33 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 21 23:41:33 Tower kernel: blk_update_request: I/O error, dev sdac, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac1, logical block 976754160, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: blk_update_request: I/O error, dev sdac, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 21 23:41:34 Tower kernel: Buffer I/O error on dev sdac, logical block 0, async page read
Aug 22 05:44:41 Tower unassigned.devices: Error: shell_exec(/bin/df '/mnt/disks/d_240' --output=size,used,avail | /bin/grep -v '1K-blocks' 2>/dev/null) took longer than 2s!
Aug 22 09:20:21 Tower ntfs-3g[27765]: ntfs_attr_mst_pwrite: written=-1: Input/output error
Aug 22 09:20:21 Tower ntfs-3g[27765]: Error writing $Mft record(s): Input/output error
Aug 22 09:20:21 Tower kernel: blk_update_request: I/O error, dev sdy, sector 2208 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 09:20:21 Tower kernel: blk_update_request: I/O error, dev sdy, sector 977028288 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
Aug 22 09:20:21 Tower kernel: Buffer I/O error on dev sdy1, logical block 122128280, lost async page write
Aug 22 09:20:21 Tower kernel: blk_update_request: I/O error, dev sdy, sector 2208 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 09:20:21 Tower ntfs-3g[27765]: ntfs_attr_mst_pwrite: written=-1: Input/output error
Aug 22 09:20:21 Tower ntfs-3g[27765]: Error writing $Mft record(s): Input/output error
Aug 22 09:20:36 Tower kernel: blk_update_request: I/O error, dev sdw, sector 219283032 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
Aug 22 09:20:37 Tower kernel: blk_update_request: I/O error, dev sdw, sector 219283032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 09:20:37 Tower kernel: Buffer I/O error on dev sdw2, logical block 27406283, async page read
Aug 22 10:06:33 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 976756264 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 22 10:06:34 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:06:34 Tower kernel: Buffer I/O error on dev sdbo1, logical block 122094277, async page read
Aug 22 10:06:34 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:06:34 Tower kernel: Buffer I/O error on dev sdbo1, logical block 122094277, async page read
Aug 22 10:06:34 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:06:34 Tower kernel: Buffer I/O error on dev sdbo1, logical block 122094277, async page read
Aug 22 10:07:08 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 22 10:07:09 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:07:09 Tower kernel: Buffer I/O error on dev sdaa1, logical block 0, async page read
Aug 22 10:07:09 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 10:07:09 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:07:09 Tower kernel: Buffer I/O error on dev sdaa1, logical block 976754160, async page read
Aug 22 10:08:15 Tower kernel: blk_update_request: I/O error, dev sdv, sector 33056 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 10:08:17 Tower kernel: blk_update_request: I/O error, dev sdv, sector 33056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:08:17 Tower kernel: Buffer I/O error on dev sdv2, logical block 36, async page read
Aug 22 10:08:17 Tower kernel: blk_update_request: I/O error, dev sdv, sector 33056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:08:17 Tower kernel: Buffer I/O error on dev sdv2, logical block 36, async page read
Aug 22 10:08:17 Tower kernel: blk_update_request: I/O error, dev sdv, sector 33056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:08:17 Tower kernel: Buffer I/O error on dev sdv2, logical block 36, async page read
Aug 22 10:08:17 Tower kernel: blk_update_request: I/O error, dev sdv, sector 33056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:08:17 Tower kernel: Buffer I/O error on dev sdv2, logical block 36, async page read
Aug 22 10:09:14 Tower kernel: blk_update_request: I/O error, dev sdz, sector 976756264 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 10:09:14 Tower kernel: blk_update_request: I/O error, dev sdz, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:09:14 Tower kernel: Buffer I/O error on dev sdz1, logical block 122094277, async page read
Aug 22 10:09:14 Tower kernel: blk_update_request: I/O error, dev sdz, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:09:14 Tower kernel: Buffer I/O error on dev sdz1, logical block 122094277, async page read
Aug 22 10:09:14 Tower kernel: blk_update_request: I/O error, dev sdz, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:09:14 Tower kernel: Buffer I/O error on dev sdz1, logical block 122094277, async page read
Aug 22 10:09:14 Tower kernel: blk_update_request: I/O error, dev sdz, sector 976756264 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:09:14 Tower kernel: Buffer I/O error on dev sdz1, logical block 122094277, async page read
Aug 22 10:37:43 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 10:37:44 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:37:44 Tower kernel: Buffer I/O error on dev sdbq1, logical block 976754160, async page read
Aug 22 10:37:52 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 10:37:54 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 10:37:54 Tower kernel: Buffer I/O error on dev sdbp1, logical block 976754160, async page read
Aug 22 11:09:05 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 22 11:09:05 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa1, logical block 976754160, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: blk_update_request: I/O error, dev sdaa, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read
Aug 22 11:09:06 Tower kernel: Buffer I/O error on dev sdaa, logical block 0, async page read

 

Link to comment

To add some additional information. smartctl -i /dev/sdad on a drive and got the below:

 

smartctl -i /dev/sdad
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HITACHI
Product:              HUS724040ALE64DB
Revision:             NA01
Compliance:           SPC-3
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Logical Unit id:      0x5000cca22be0f3aa
Serial number:        PAJAH58T
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sun Aug 22 14:10:38 2021 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

 

I then ran ran smartctl -a /dev/sdad and received the following:

 

smartctl -a /dev/sdad
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HITACHI
Product:              HUS724040ALE64DB
Revision:             NA01
Compliance:           SPC-3
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Logical Unit id:      0x5000cca22be0f3aa
Serial number:        PAJAH58T
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sun Aug 22 14:11:55 2021 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Read defect list: asked for grown list but didn't get it
Error Counter logging not supported

Device does not support Self Test logging

 

I would think that firmware on the hard drive or something with the HBA settings (not sure how to check those).

Link to comment

So, I found this thread and it seems like it could be an issue in smartmontools 7.1 and HBA cards or just in certain scenarios. It appears upgrading to 7.2 fixed the issue for this person. Can I update smartmontools in unraid without screwing everything up? I'm on unraid 6.9.2. If I can, how can I go about doing that properly? 

 

https://www.smartmontools.org/ticket/1331?cversion=0&cnum_hist=4

Edited by live4soccer7
Link to comment

Another update. Doing some more digging, specifically on netapp hgst drives. I found that on the ds4486, you have to run a specific parameter to get the smart test info.

 

smartctl -a -d sat /dev/your_disk

 

This worked when I ran the test on a disk from the console. Great information. I see there is an option in the individual disks in unassigned devices when you click on the disks.

 

Smart Controller Type --> SAT

Then when you choose SAT it provides two additional fields, which I am unsure of what to put as this is, again, new to me. 

 

If I leave auto blank and choose  12, it seems to show the smart data. What are the 12 and 16 numbers representing?

 

Any help on this one?

 

Edit: the temps are reported in the smart test, but not on the unraid dash/gui. I believe this is likely the issue of smartmontools and link I provided earlier. I think when the next release comes out it will fix this as it seems they have smartmontools 7.2 for the next release.

Edited by live4soccer7
  • Like 1
Link to comment
2 minutes ago, JorgeB said:

Because of the Netapp they appear as SAS, so it's the same as if they were really SAS, and it work.

 

With the changes I made that I posted up, it is working. I have ran several short tests and currently waiting to see if an extended test works. It has been about 8-9 hours on the extended test and it still says 10%. The temps are actually populating in the gui as well. I suppose it just had to poll them and I'm not sure what I have that interval set at currently.

 

Device model:HITACHI HUS724040ALE640

Serial number:PAJEK98T

LU WWN device id:5 000cca 22be258c5

Firmware version:MJAONS04

User capacity:4,000,787,030,016 bytes [4.00 TB]

Sector sizes:512 bytes logical, 4096 bytes physical

Rotation rate:7200 rpm

Form factor:3.5 inches

Device:Not in smartctl database [for details use: -P showall]

ATA version:ATA8-ACS T13/1699-D revision 4

SATA version:SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local time:Mon Aug 23 08:42:39 2021 PDT

SMART support:Available - device has SMART capability.

SMART support:Enabled

SMART overall-health:Passed

 

1Raw read error rate0x000b100100016Pre-failAlwaysNever0

2Throughput performance0x0005100100054Pre-failOfflineNever0

3Spin up time0x0007100100024Pre-failAlwaysNever495

4Start stop count0x0012100100000Old ageAlwaysNever18

5Reallocated sector count0x0033100100005Pre-failAlwaysNever0

7Seek error rate0x000b100100067Pre-failAlwaysNever0

8Seek time performance0x0005100100020Pre-failOfflineNever0

9Power on hours0x0012092092000Old ageAlwaysNever58421 (6y, 7m, 30d, 5h)

10Spin retry count0x0013100100060Pre-failAlwaysNever0

12Power cycle count0x0032100100000Old ageAlwaysNever14

192Power-off retract count0x0032099099000Old ageAlwaysNever2346

193Load cycle count0x0012099099000Old ageAlwaysNever2346

194Temperature celsius0x0002181181000Old ageAlwaysNever33 (min/max 22/38)

196Reallocated event count0x0032100100000Old ageAlwaysNever0

197Current pending sector0x0022100100000Old ageAlwaysNever0

198Offline uncorrectable0x0008100100000Old ageOfflineNever0

199UDMA CRC error count0x000a200200000Old ageAlwaysNever0

Link to comment

I'll be getting a supermicro 24 bay to house the server as well and additional drives, so it will be good to get some experience with both solutions and compare.

 

I'm still getting errors in the logs. Any ideas? Maybe I should post this in the unassigned devices plugin thread??

 

Aug 23 08:16:20 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:21 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:21 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:22 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:22 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:22 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:22 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:22 Tower kernel: blk_update_request: I/O error, dev sdbo, sector 1189481720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:22 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:22 Tower kernel: Buffer I/O error on dev sdbo1, logical block 148684959, async page read
Aug 23 08:16:44 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 23 08:16:46 Tower kernel: blk_update_request: I/O error, dev sdbq, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:46 Tower kernel: Buffer I/O error on dev sdbq1, logical block 976754160, async page read
Aug 23 08:16:54 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 7814035328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Aug 23 08:16:55 Tower kernel: blk_update_request: I/O error, dev sdbp, sector 7814035328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Aug 23 08:16:55 Tower kernel: Buffer I/O error on dev sdbp1, logical block 976754160, async page read

 

 

Link to comment
2 minutes ago, JorgeB said:

There have been some spin up issue with some hardware, disable spin down to test and see if it makes any difference.

I'll give it a shot. It does seem like it those errors don't constantly happen, so something it requesting and causing it. I'll do some more trouble-shooting / digging into this evening.

 

The last batch of errors was over 2 hrs ago.

Edited by live4soccer7
Link to comment
5 hours ago, JorgeB said:

There have been some spin up issue with some hardware, disable spin down to test and see if it makes any difference.

 

I've pretty much confirmed it is literally just the spin-up time of the disks. If I do a FS check on the disk when it is spun down then I will get the errors posted above. The check will fail and the disk will be spun up moments after (automatically). If I do the check again when the disk is spun up then it works perfectly and there are no errors. It is simply a timeout issue while waiting for the disk to spin up.

 

It takes roughly 3s more to spin up than a disk not on the netapp and that difference is the problem.

  • Like 1
Link to comment
  • 2 weeks later...

With changing the controller type in Global SMART settings to SAT, do the drives show up properly with ata-model-serialnum (instead of scsi-1234556890) for the disk naming? I also have one of the DS4486 shelves and don't use it because I couldnt get smart data and also disk naming made things more complicated because you had to make sure you knew where disks were being moved to (I think, I might be wrong on this part).

Link to comment

I am not sure. I thought about changing to global setting, but I also have 25 or so other disks a part of the unraid array that I didn't want to lose data for. I would imagine the global setting would persist. I would like to run smart tests on all 48 disks and be able to see the temps. The smart tests for now because the unit is newer and the seller said he would replace and disks that failed the smart test.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.