[SOLVED] No drives being seen in Unraid after moving servers

[Singularity42]

Just moved from a tower to a HPE Proliant 380 G9 - Has a P840ar Controller.  Im trying to figure out whats going on, but the drives cant seem to be seen by unraid.  They look like they are showing up in dmesg, so at least they are being detected.  Just not sure why unraid cant interact with them?

singularity-diagnostics-20210901-1647.zip

[ChatNoir]

Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:0:0: added RAID              HP       P840ar           controller SSDSmartPathCap- En- Exp=1
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:1:0: masked Direct-Access     ATA      Hitachi HUA72303 PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:2:0: masked Direct-Access     ATA      ST3000DM001-1CH1 PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:3:0: masked Direct-Access     ATA      Hitachi HUS72403 PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:4:0: masked Direct-Access     SEAGATE  ST3000NM0035     PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:5:0: masked Direct-Access     SEAGATE  ST3000NM0035     PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:6:0: masked Direct-Access     SEAGATE  ST3000NM0035     PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:7:0: masked Direct-Access     ATA      ST3000DM001-1CH1 PHYS DRV SSDSmartPathCap- En- Exp=0
Aug 31 10:26:06 Singularity kernel: hpsa 0000:03:00.0: scsi 1:0:8:0: masked Direct-Access     ATA      ST3000DM001-1ER1 PHYS DRV SSDSmartPathCap- En- Exp=0

 

You should check this recent topic :

 

 

[Singularity42]

Thanks.  I forgot to set it to HBA mode.  Once I did that, unraid can see all the drives.