flyize Posted September 21, 2022 Share Posted September 21, 2022 1 hour ago, TurboStreetCar said: @VideoVibrations Quick question, will i need a dummy monitor plug plugged into the MB to utilize the iGPU? Probably not, but if you have issues that should be the first thing you add. 1 Quote Link to comment
VideoVibrations Posted September 21, 2022 Share Posted September 21, 2022 1 hour ago, TurboStreetCar said: @VideoVibrations Quick question, will i need a dummy monitor plug plugged into the MB to utilize the iGPU? I just confirmed, at least on my machine, that it will still transcode using the iGPU without a dummy HDMI installed. 1 Quote Link to comment
mbc0 Posted September 25, 2022 Share Posted September 25, 2022 I am looking to build a replacement setup for my 2950x Threadripper due to power costs The i9 12900 is 65w compared to my current 180w plus the IGPU (Intel 770) from what I read would be great for Plex but would I need another GPU to be able to use it on unraid? as in I would not be able to pass it through to Plex without another GPU being available? I currently use HW encdoding for Plex so I am thinking the saving on the CPU wattage plus being able to use the IGPU for Plex should make quite a difference? Any rights or wrongs here? Thank you! Quote Link to comment
Anders.op Posted September 25, 2022 Share Posted September 25, 2022 I have that cpu - No need to buy another gpu as hw transcoding is working fine in plex (No hdr tonemapping yet). Quote Link to comment
flyize Posted September 25, 2022 Share Posted September 25, 2022 2 hours ago, Anders.op said: I have that cpu - No need to buy another gpu as hw transcoding is working fine in plex (No hdr tonemapping yet). Tone mapping works now. 1 Quote Link to comment
NightOps Posted September 25, 2022 Share Posted September 25, 2022 1 hour ago, flyize said: Tone mapping works now. Is that starting on 6.11 with Plex Pass/Official? Quote Link to comment
snazz Posted September 25, 2022 Share Posted September 25, 2022 20 minutes ago, NightOps said: Is that starting on 6.11 with Plex Pass/Official? It's not working for me with 6.11 with Plex Pass (currently 1.29.0.6244). @flyize must be running a beta that isn't GA yet. I know he's been "on the wall" (get it?😁) in the Plex forums watching for development updates on this. 1 Quote Link to comment
Dephcon Posted September 26, 2022 Share Posted September 26, 2022 (edited) 10 hours ago, flyize said: Tone mapping works now. Sorry, can you elaborate on that a bit? Was about to pull the trigger on 11th gen, but would prefer 12th. so with 12th gen: it's stable with unraid in general it does plex docker hardware h264 encode/decode and h265 decode it does plex docker HDR tone mapping while hardware encode/decode is enabled (and actually working) thanks! Edited September 26, 2022 by Dephcon Quote Link to comment
NightOps Posted September 26, 2022 Share Posted September 26, 2022 2 minutes ago, Dephcon said: Sorry, can you elaborate on that a bit? Was about to pull the trigger on 11th gen, but would prefer 12th. so with 12th gen: it's stable with unraid in general it does plex docker hardware h264 encode/decode and h265 decode it does plex docker HDR tone mapping while hardware encode/decode is enabled (and actually working) thanks! 1 & 2: definitely. Cannot confirm #3 1 Quote Link to comment
flyize Posted September 26, 2022 Share Posted September 26, 2022 22 hours ago, NightOps said: Is that starting on 6.11 with Plex Pass/Official? It's my understanding that at this point its all Plex fixes, and according to posts after my question here - people are reporting it works. https://forums.plex.tv/t/pms-packaging-07-2022-update-forum-preview-testing/799912/96 I don't have any content to test it with though. Quote Link to comment
dimes007 Posted September 28, 2022 Share Posted September 28, 2022 (edited) Is there any news on hardware decode of 4k hevc (h.265) with intel igpu? So many of my files don't work and I'm unsure why? Thanks. Edited September 28, 2022 by dimes007 Quote Link to comment
snazz Posted September 28, 2022 Share Posted September 28, 2022 (edited) On 9/25/2022 at 10:20 AM, flyize said: Tone mapping works now. I'm thrilled to report HDR Tone Mapping with the iGPU is working with Plex version 1.29.1.6241 with Unraid 6.11.0 on my i5 12600k system. Edited September 28, 2022 by snazz added the iGPU part. It was working via software in previous Plex versions. 4 Quote Link to comment
cscoppa Posted September 28, 2022 Share Posted September 28, 2022 8 minutes ago, snazz said: I'm thrilled to report HDR Tone Mapping with the iGPU is working with Plex version 1.29.1.6241 with Unraid 6.11.0 on my i5 12600k system. Working here too on the i7-12700. NOTE: You have to be on the Plexpass version. ( plexinc/pms-docker:plexpass ) Quote Link to comment
dimes007 Posted September 28, 2022 Share Posted September 28, 2022 (edited) 1 hour ago, snazz said: I'm thrilled to report HDR Tone Mapping with the iGPU is working with Plex version 1.29.1.6241 with Unraid 6.11.0 on my i5 12600k system. I have version 1.29.0.6244 using plexinc/pms-docker:plexpass. Update channel is "beta" but I'm not sure how to download and install it because I only update from docker, never manually. got it: i changed version from plexpass to beta. Edited September 28, 2022 by dimes007 fixed problem. Quote Link to comment
fiR3W4LL Posted September 29, 2022 Share Posted September 29, 2022 Hey GuysHow is the Powerdraw with the 12th gen Intel? Looking forward to change my AMD + Nvidia System to Intel with iGPU!Gesendet von iPhone mit Tapatalk Quote Link to comment
VideoVibrations Posted September 29, 2022 Share Posted September 29, 2022 8 hours ago, fiR3W4LL said: Hey Guys How is the Powerdraw with the 12th gen Intel? Difficult question to answer as it depends on your hardware setup. My system idles at 54-60W (8 disk drives sleeping, 2 NVMes active, 12700k). About 75-80W if 1-3 disk drives are active. It can bump up to ~140-200W if transcoding. Speaking of transcoding... Confirming that tonemapping works on the linuxserver/plex container (currently need to be using the "latest" version). Hardware transcoding is now about 95-105W. Quote Link to comment
fiR3W4LL Posted September 29, 2022 Share Posted September 29, 2022 (edited) 38 minutes ago, VideoVibrations said: Difficult question to answer as it depends on your hardware setup. My system idles at 54-60W (8 disk drives sleeping, 2 NVMes active, 12700k). About 75-80W if 1-3 disk drives are active. It can bump up to ~140-200W if transcoding. Speaking of transcoding... Confirming that tonemapping works on the linuxserver/plex container (currently need to be using the "latest" version). Hardware transcoding is now about 95-105W. Okey nice one for an 125 W CPU The most interessting CPU will be the 12900 non K with a Base of 65W But think will see one here Edited September 29, 2022 by fiR3W4LL Quote Link to comment
Blobbonator Posted September 29, 2022 Share Posted September 29, 2022 21 hours ago, snazz said: I'm thrilled to report HDR Tone Mapping with the iGPU is working with Plex version 1.29.1.6241 with Unraid 6.11.0 on my i5 12600k system. Finally i can get rid of the Quadro P600 in my unraid server - nice also rocking a i5 12600k Quote Link to comment
mgutt Posted September 30, 2022 Share Posted September 30, 2022 15 hours ago, fiR3W4LL said: Okey nice one for an 125 W CPU In fact it's really really bad. TDP has nothing to do with efficiency in idle or transcoding. Every 11th Gen Intel upwards is extremely power hungry. Only for comparison: My 9th gen Xeon 6 core setup consumes 13W without 10g card. 19w with. And I have 8 HDDs in Spin down (each consumes 0.5W). 1 Quote Link to comment
ich777 Posted September 30, 2022 Share Posted September 30, 2022 On 9/21/2022 at 6:22 PM, TurboStreetCar said: Quick question, will i need a dummy monitor plug plugged into the MB to utilize the iGPU? On 9/21/2022 at 8:09 PM, VideoVibrations said: I just confirmed, at least on my machine, that it will still transcode using the iGPU without a dummy HDMI installed. I would recommend that you always plugin in a HDMI Dummy plug with a valid EDID to your motherboard if you want to use the iGPU for transcoding. Don't forget that most of this stuff is consumer grade hardware and not for business use and such hardware was most of the times never designed for running it headless like in our use case with Unraid. Quote Link to comment
dchamb Posted September 30, 2022 Share Posted September 30, 2022 29 minutes ago, ich777 said: I would recommend that you always plugin in a HDMI Dummy plug with a valid EDID to your motherboard if you want to use the iGPU for transcoding. Don't forget that most of this stuff is consumer grade hardware and not for business use and such hardware was most of the times never designed for running it headless like in our use case with Unraid. Is the HDMI dummy plug necessary if you have a physical monitor plugged into the port through a KVM switch? Quote Link to comment
ich777 Posted September 30, 2022 Share Posted September 30, 2022 23 minutes ago, dchamb said: Is the HDMI dummy plug necessary if you have a physical monitor plugged into the port through a KVM switch? Necessary is a „strong“ word… Lets put it this way, I would recommend that there is always some kind of Display or at least a HDMI Dummy Plug with a valid EDID connected to the iGPU if you want to use it for transcoding. In your case it should be enough to have the KVM connected. 1 Quote Link to comment
Titan84 Posted September 30, 2022 Share Posted September 30, 2022 @ich777 do you have a dummy plug that you would recommend? I'm not using 1 either and currently i dont have any issues but reading this im thinking that adding one won't hurt 🙂 Quote Link to comment
Wintersdark Posted September 30, 2022 Share Posted September 30, 2022 1 hour ago, ich777 said: Necessary is a „strong“ word… Lets put it this way, I would recommend that there is always some kind of Display or at least a HDMI Dummy Plug with a valid EDID connected to the iGPU if you want to use it for transcoding. In your case it should be enough to have the KVM connected. "Should" being operative here. There's a few layers of should in there. It depends on the KVM switch, really, if it edid information when off/switched to another input, or he may have an issue where sometimes it fails. It *seems* like Alder Lake doesn't care as much as previous iGPU's about having that connection to work (mine has worked without my dummy plug installed since my Alder Lake upgrade) but... Eh. It should be fine. If one has an unused video out on their motherboard, spending the $3 on Amazon for a dummy plug is great piece of mind. Quote Link to comment
ich777 Posted September 30, 2022 Share Posted September 30, 2022 1 hour ago, Titan84 said: @ich777 do you have a dummy plug that you would recommend? I'm not using 1 either and currently i dont have any issues but reading this im thinking that adding one won't hurt 🙂 I've bought this one and can confirm that it provides a valid EDID, don't know if you can get it where you live (1080p should do the job just fine). 20 minutes ago, Wintersdark said: It *seems* like Alder Lake doesn't care as much as previous iGPU's about having that connection to work (mine has worked without my dummy plug installed since my Alder Lake upgrade) but... This can change pretty quickly since back then older iGPUs also had no issue transcoding but suddenly (I think this was somehwere at Kernel version 5.10.x) transcoding stopped working on some hardware combinations and older iGPUs and a connected Display or a HDMI Dummy plug was necessary and this can happen to Alder Lake too. As said above we are dealing with consumer hardware and it was never intended for our use case with a headless server and HW transcoding without a display connected, that's why I always will recommend to use at least a HDMI Dummy Plug. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.