dcoens Posted September 7, 2021 Share Posted September 7, 2021 This is my tail log. I was copying my data to my usb drive as a backup. I'm getting this error when tring to bring it online. Is their a XFS repair command or something? I have no idea about a duplicate UUID. Sep 6 18:21:50 COENSSERVER unassigned.devices: Partition 'WD Elements_25A3' cannot be mounted. Sep 6 18:22:03 COENSSERVER kernel: usb 2-1.4: USB disconnect, device number 14 Sep 6 18:22:22 COENSSERVER kernel: usb 2-1.6: new high-speed USB device number 15 using ehci-pci Sep 6 18:22:22 COENSSERVER kernel: usb-storage 2-1.6:1.0: USB Mass Storage device detected Sep 6 18:22:22 COENSSERVER kernel: scsi host9: usb-storage 2-1.6:1.0 Sep 6 18:22:23 COENSSERVER kernel: scsi 9:0:0:0: Direct-Access WD Elements 25A3 1030 PQ: 0 ANSI: 6 Sep 6 18:22:23 COENSSERVER kernel: sd 9:0:0:0: Attached scsi generic sg12 type 0 Sep 6 18:22:23 COENSSERVER kernel: sd 9:0:0:0: [sdm] Spinning up disk... Sep 6 18:22:40 COENSSERVER kernel: .................ready Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] Very big device. Trying to use READ CAPACITY(16). Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] 27344699392 512-byte logical blocks: (14.0 TB/12.7 TiB) Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] 4096-byte physical blocks Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] Write Protect is off Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] Mode Sense: 47 00 10 08 Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] No Caching mode page found Sep 6 18:22:40 COENSSERVER kernel: sd 9:0:0:0: [sdm] Assuming drive cache: write through Sep 6 18:22:41 COENSSERVER kernel: sdm: sdm1 Sep 6 18:22:41 COENSSERVER kernel: sd 9:0:0:0: [sdm] Attached SCSI disk Sep 6 18:22:41 COENSSERVER unassigned.devices: Adding disk '/dev/sdm1'... Sep 6 18:22:41 COENSSERVER unassigned.devices: Mount drive command: /sbin/mount -t 'xfs' -o rw,noatime,nodiratime '/dev/sdm1' '/mnt/disks/WD_Elements_25A3' Sep 6 18:22:41 COENSSERVER kernel: XFS (sdm1): Filesystem has duplicate UUID 5ecba8e2-00f3-4555-b4e5-4af0c877c5be - can't mount Sep 6 18:22:41 COENSSERVER unassigned.devices: Mount of '/dev/sdm1' failed: 'mount: /mnt/disks/WD_Elements_25A3: wrong fs type, bad option, bad superblock on /dev/sdm1, missing codepage or helper program, or other error. ' Sep 6 18:22:41 COENSSERVER unassigned.devices: Partition 'WD Elements_25A3' cannot be mounted. Sep 6 18:22:55 COENSSERVER unassigned.devices: Warning: Can't get rotational setting of 'sdo'. Quote Link to comment
dcoens Posted September 7, 2021 Author Share Posted September 7, 2021 Ok... I used xfs_admin -U generate /dev/sdm1 command. It seemed to fix it. I am not sure why this would have happened in the first place. Quote Link to comment
itimpi Posted September 7, 2021 Share Posted September 7, 2021 4 hours ago, dcoens said: Ok... I used xfs_admin -U generate /dev/sdm1 command. It seemed to fix it. I am not sure why this would have happened in the first place. Was just going to suggest that You can also do the same from the GUI using UD by clicking on the Settings icon for the drive. You can get this issue if the drive in question was previously used in the main array and was not reformatted as it will have the same UUID as the drive that has replaced it. Was that what happened? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.