Hi, my unraid server started disappearing at random times, with no access through Web Gui, if i plug an screen to the pc it shows nothing.

Unraid is disappearing in the middle of the project while im accessing data from it.

I just power cycle the pc to get it working again and the parity check goes on. 

Temps are well, all fans running.

Recently i changed the switch for a lower power one, but it was working for at least 2 weeks before this started.. 

How can i Diagnose the machine?  (update, attached the syslog but it only shows info from the last reboot that was today.. also uploaded nas diagnostics)

Thx to all

syslog

nas-diagnostics-20210908-1021.zip

Edited September 8, 20214 yr by danielaqz
update with file

Start here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

Thx JorgeB, it just started appearing, i have the server for more than 1.5 years, no hardware or configuration change..

But will try it . thx

You can also enable syslog mirror to flash then post that log after a crash.

Thanks! i have activated the syslog, directed to the ssd cache. Thx, will update next time! 

Hi, the error happened again, only this time the nas came back without restarting.

Here is a part of the log. I was working fine until 13:10:02. I get up for Lunch and then came back to find it unresponsive, connected a keyboard and it came back to life, and i manage to enter the web Gui

 

Sep  8 10:49:34 NAS kernel: mdcmd (43): spindown 1
Sep  8 11:09:43 NAS kernel: mdcmd (44): spindown 1
Sep  8 12:00:07 NAS crond[1906]: exit status 1 from user root /usr/local/sbin/mover &> /dev/null
Sep  8 12:15:33 NAS emhttpd: shcmd (387): /usr/sbin/hdparm -y /dev/nvme0n1
Sep  8 12:15:33 NAS root:  HDIO_DRIVE_CMD(standby) failed: Inappropriate ioctl for device
Sep  8 12:15:33 NAS root: 
Sep  8 12:15:33 NAS root: /dev/nvme0n1:
Sep  8 12:15:33 NAS root:  issuing standby command
Sep  8 12:15:33 NAS emhttpd: shcmd (387): exit status: 25

Sep  8 12:35:48 NAS kernel: mdcmd (45): spindown 1
Sep  8 13:10:02 NAS kernel: mdcmd (46): spindown 1
Sep  8 13:19:13 NAS emhttpd: shcmd (515): /usr/sbin/hdparm -y /dev/nvme0n1
Sep  8 13:19:13 NAS root:  HDIO_DRIVE_CMD(standby) failed: Inappropriate ioctl for device
Sep  8 13:19:13 NAS root: 
Sep  8 13:19:13 NAS root: /dev/nvme0n1:
Sep  8 13:19:13 NAS root:  issuing standby command
Sep  8 13:19:13 NAS emhttpd: shcmd (515): exit status: 25
Sep  8 14:32:43 NAS kernel: usb 5-3: new low-speed USB device number 4 using xhci_hcd
Sep  8 14:32:43 NAS kernel: input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-3/5-3:1.0/0003:413C:2113.0003/input/input7
Sep  8 14:32:43 NAS kernel: hid-generic 0003:413C:2113.0003: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:0e:00.3-3/input0
Sep  8 14:32:43 NAS kernel: input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-3/5-3:1.1/0003:413C:2113.0004/input/input8
Sep  8 14:32:43 NAS kernel: input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb5/5-3/5-3:1.1/0003:413C:2113.0004/input/input9
Sep  8 14:32:43 NAS kernel: hid-generic 0003:413C:2113.0004: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:0e:00.3-3/input1
Sep  8 14:32:52 NAS webGUI: Successful login user

 

Is this log enough ? or do I need extra information to pinpoint the issue?

You should zip the complete log from syslog server and post it and new diagnostics.