March 27, 201115 yr Greetings all! This is my first build and first attempt at using unRAID (4.7). After preclearing for close to 24 hours, my two drives that are preclearing have been "duplicated" and show no memory. Is this normal? Syslog and unMenu below. Ignore the ethernet disconnect, I had to unplug it for a bit. UNRAID Drive Device Model/Serial Mounted File System Size Used %Used Free /dev/sdd1 usb-SanDisk_Cruzer_Blade_2004431841031A7278A6-0:0 /boot vfat 4.00G 107.19M 3% 3.89G Drive Partitions - Not In Protected Array Device Model/Serial Mounted File System Temp Size Used %Used Free /dev/sdb ST32000542AS_5XW2D8NK 26°C 2.00T /dev/sdb1 ST32000542AS_5XW2D8NK 26°C /dev/sdc ST32000542AS_6XW25V1Z 22°C 2.00T /dev/sda WDC_WD20EARS-00MVWB0_WD-WMAZA3206317 25°C 2.00T /dev/sda1 WDC_WD20EARS-00MVWB0_WD-WMAZA3206317 25°C syslog.txt
March 27, 201115 yr Author Web interface shows nothing as no drives are assigned. I can select them from the dropdown (under devices) and it only shows the original drives (sda, sdb, sdc). I have 3 drives (2 in preclear, 1 waiting for firmware update after others preclear).
March 27, 201115 yr sda refers to the whole drive and sda1 refers to the first partition on the drive. The preclear adds the partition. Peter
Archived
This topic is now archived and is closed to further replies.