matt.shepker Posted September 27, 2021 Share Posted September 27, 2021 I have just rebuilt my array after I had a drive crater. I used the opportunity to somewhat start from scratch as I had some issues that I wanted to clear up. I noticed this morning the drive (sdb) that I put in there is reporting a single read error. It is a "new" drive in that this was a warranty replacement. I am guessing that it is probably a refurb, but I don't know. Any thoughts on what I should do with this? I don't have a spare drive on hand, so I'd need to get another one ordered if it is critical. Let me know your thoughts... sp-urhost01-diagnostics-20210927-0819.zip Quote Link to comment
JorgeB Posted September 27, 2021 Share Posted September 27, 2021 It's logged as a disk problem, run an extended SMART test. Quote Link to comment
matt.shepker Posted September 28, 2021 Author Share Posted September 28, 2021 I'm not sure if I'm missing something, but the extended SMART test has been running for over 24 hours. This is the output as it stands at the moment. SMART-WD-WX62D60C9N5X.txt Quote Link to comment
JorgeB Posted September 29, 2021 Share Posted September 29, 2021 No info there, but not all drives report running tests. Quote Link to comment
matt.shepker Posted September 29, 2021 Author Share Posted September 29, 2021 Something unusual happened on this machine. It seemed to have gotten stuck at 90% so after 48 hours, I cancelled the test and ran smartctl -t select,0-max /dev/sdb instead. While that was running, I had a power blip (and UPS failure) and the machine rebooted. After reboot, the drives are reporting no errors. I'm not sure what to do at this point other than keep an eye on it. I have ordered a spare drive just in case. Quote Link to comment
JorgeB Posted September 29, 2021 Share Posted September 29, 2021 You can also run a non correcting parity check, same result as an extended SMART test. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.