September 27, 20214 yr ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 31135 hours (1297 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 98 85 6e eb Error: UNC 8 sectors at LBA = 0x0b6e8598 = 191792536 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 98 85 6e eb 08 22d+08:23:14.259 READ DMA Error 1 occurred at disk power-on lifetime: 31135 hours (1297 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 d8 9d 4d e1 Error: UNC 8 sectors at LBA = 0x014d9dd8 = 21863896 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 d8 9d 4d e1 08 22d+08:06:46.826 READ DMA c8 00 08 b0 76 5a e1 08 22d+08:06:46.781 READ DMA One of my drive show 14 errors. I run a SMART test and this is the logs. What does it means? The drive still green btw. Thanks.
September 27, 20214 yr Community Expert Please post the complete SMART report or better yet the diagnostics.
September 28, 20214 yr Community Expert Disk has pending sectors and failed the SMART test, it needs to be replaced.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.