Skip to content
View in the app

A better way to browse. Learn more.
Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Unraid Summer Sale in live: 20% off Starter and Unleashed + buy one, get one 50% off

Hard drive not reading size -

cbr600ds2
in General Support

Featured Replies

Hello -

 

 

Why does it read what it is but not able to work?  I tried a few different bays.  

 

 

Sep 29 17:14:06 Skynet kernel: sd 11:0:23:0: [sdw] Spinning up disk...
Sep 29 17:14:22 Skynet kernel: sd 11:0:23:0: [sdw] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Sep 29 17:14:22 Skynet kernel: sd 11:0:23:0: [sdw] Write Protect is off
Sep 29 17:14:22 Skynet kernel: sd 11:0:23:0: [sdw] Mode Sense: db 00 10 08
Sep 29 17:14:22 Skynet kernel: sd 11:0:23:0: [sdw] Write cache: enabled, read cache: enabled, supports DPO and FUA
Sep 29 17:14:22 Skynet kernel: sd 11:0:23:0: [sdw] Attached SCSI disk
Sep 29 17:42:29 Skynet kernel: sd 11:0:23:0: [sdw] Synchronizing SCSI cache
Sep 29 17:42:29 Skynet kernel: sd 11:0:23:0: [sdw] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Sep 29 17:42:34 Skynet kernel: sd 11:0:26:0: [sdw] Spinning up disk...
Sep 29 17:42:45 Skynet kernel: sd 11:0:26:0: [sdw] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Sep 29 17:42:45 Skynet kernel: sd 11:0:26:0: [sdw] Write Protect is off
Sep 29 17:42:45 Skynet kernel: sd 11:0:26:0: [sdw] Mode Sense: db 00 10 08
Sep 29 17:42:45 Skynet kernel: sd 11:0:26:0: [sdw] Write cache: enabled, read cache: enabled, supports DPO and FUA
Sep 29 17:42:45 Skynet kernel: sd 11:0:26:0: [sdw] Attached SCSI disk
Sep 29 17:43:28 Skynet emhttpd: ST4000NM0023_Z1Z86TQP0000C5320ZHJ_35000c50063783337 (sdw) 512 7814037168
Sep 29 17:43:28 Skynet emhttpd: read SMART /dev/sdw
Sep 29 17:43:56 Skynet kernel: sd 11:0:26:0: [sdw] Synchronizing SCSI cache
Sep 29 17:43:56 Skynet kernel: sd 11:0:26:0: [sdw] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Sep 29 17:44:18 Skynet kernel: sd 11:0:27:0: [sdw] Spinning up disk...
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Sense not available.
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Sense not available.
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] 0 512-byte logical blocks: (0 B/0 B)
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] 0-byte physical blocks
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Write Protect is off
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Mode Sense: 00 00 00 00
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Asking for cache data failed
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Assuming drive cache: write through
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Read Capacity(16) failed: Result: hostbyte=0x07 driverbyte=0x00
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Sense not available.
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Sense not available.
Sep 29 17:45:13 Skynet kernel: sd 11:0:27:0: [sdw] Attached SCSI disk
Sep 29 17:45:20 Skynet kernel: sd 11:0:28:0: [sdw] Spinning up disk...
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Sense Key : 0x2 [current] [descriptor]
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] ASC=0x4 ASCQ=0x1
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Sense Key : 0x2 [current] [descriptor]
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] ASC=0x4 ASCQ=0x1
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] 0 512-byte logical blocks: (0 B/0 B)
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] 0-byte physical blocks
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Test WP failed, assume Write Enabled
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Asking for cache data failed
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Assuming drive cache: write through
Sep 29 17:47:01 Skynet kernel: sd 11:0:28:0: [sdw] Spinning up disk...
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] Sense Key : 0x2 [current] [descriptor]
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] ASC=0x4 ASCQ=0x0
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] Sense Key : 0x2 [current] [descriptor]
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] ASC=0x4 ASCQ=0x0
Sep 29 17:48:41 Skynet kernel: sd 11:0:28:0: [sdw] Attached SCSI disk
 

  • Quote
    • Community Expert

    If it's not a connection issue it's likely a bad drive, test in a different PC if available.

  • Quote

    • Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Reply to this topic...
    Go to topic listing

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.