Coke84 Posted October 6, 2021 Share Posted October 6, 2021 Hi, after having some issues with Nextcloud and MariaDB respectively, I rebooted my server the first time after months. Now, I have a lot of issues. After boot up I was not able to directly access the local IP (192.168.178.100) anymore. I always got the redirect to the hash.unraid.net page with a SSL error, regardless of whether I used the https://192.168.178.100 or http://.... Which ended up in disabling SSL in ident.cfg under /boot/config (USE_SSL="no"). After a reboot, the redirect to the hash.unraid.net is gone. I still cannot access with https:// (makes sense) but I get the login page with http://.... And that's it. I can use my credentials, but nothing happens. It again and again reloads the entry page to login. SSL, WebIfs from my Docker application etc., all is working fine with except for the login to unraid webif itself. Some ideas? Thanks Quote Link to comment
trurl Posted October 6, 2021 Share Posted October 6, 2021 https://wiki.unraid.net/Manual/Troubleshooting#Capturing_Diagnostic_Information Quote Link to comment
Coke84 Posted October 12, 2021 Author Share Posted October 12, 2021 Thanks @trurl but do I explicitly have to mention, that I cannot pull the diagnostics using the GUI as described in the link as I don't have access on the GUI anymore? Quote Link to comment
ChatNoir Posted October 12, 2021 Share Posted October 12, 2021 1 hour ago, Coke84 said: Thanks @trurl but do I explicitly have to mention, that I cannot pull the diagnostics using the GUI as described in the link as I don't have access on the GUI anymore? This possibilty is covered in the link provided, the third sentence: Quote If the GUI cannot be accessed for any reason then using the diagnostics command from the Linux level will generate the same information and put the resulting zip file into the logs folder on the flash drive. Connect via SSH and type the command. To recover the file: either your flash drive is shared on the network and you can recover it directly or you can type poweroff to shut down the server and recover the file on another machine Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.