Hi,

i have a Dell R620 and unraid does not show my gpu on the System Devices page. The bios is configured to boot unraid in bios mode (Unraid UEFI not works, it gives a common error that have no fixing as far as i've found).

 

I have the follwoing configuration:

-2x E5-2628L v2

-2x 10G + 2x 1G (both Rj45) network card (in the proprietary slot)

-SunF40 in the low profile slot

-GTX 1050Ti in the full height slot (the gpu in a the msi low profile model with the fans removed)

 

I've also tried to leave the lid opened and plugging in the original gpu fans

The gpu fan spins and i've tried both pci slots but it does not show in eith one. The pci slots works fine becasue the SunF40 show up if installed in either slots.

 

Can someone help me? (i'll upload the full diagnotics)

 

---EDIT: 

The gpu is supposably dead, the fans spins but no video output even on a windows pc.

Tried on another server, the server say that the pci slot is empty so it's not an unraid error

dellserver-diagnostics-20211007-2308.zip

Edited October 12, 20214 yr by Sbellins

So, looked at your logs, it's not seeing the card on the buss at all, can you confirm it's (the video card) working in another system?
Also you said you removed it's fan, some vendors disable the card from initializing if they can't detect their fan.

Edit, are you also plugging in the 12 volt power cables on the card it's self?

Sent from my SM-G975U using Tapatalk

Hi,

i've tried both with and without fans,

this gpu does not have a dedicated power cable, it only need the power from the pci slot.

I removed it from another system around 2 months ago, then never tested again (i will put it in another machine tomorrow or un sunday)