Sata controllers not recognized at all

[timekiller]

Sorry for the long post, but I an trying to get all the information into 1 post so there isn't a lot of back and forth.

 

I am trying to upgrade my Unraid server with a new CPU/MOBO and I'm having a hell of a time. My existing hardware is a Core i7-6700k. I have a Ryzen 5800x CPU and I've been trying to find a motherboard to match with it that will support my existing hardware.

 

Specifically I have (2) IO Crest 16 Port SATA cards, and (2) 1TB m.2 NVME drives for cache. My existing motherboard (MSI Z170A), which is like 5-6 years old at this point is able handle all this hardware without issue.

 

I have now bought 2 motherboards (first board details and issues are in this thread) 

 

I returned that board and now I have a Gigabyte X570 UD which almost fits all my hardware requirements. I'm ok on PCI slots, but there is only 1 m.2 slot. Not a HUGE deal, I can buy a new 2TB m.2 drive to replace my (2) 1TB drives.

 

The problem is that now this board will not show any drives from the SATA cards. I have tried several configurations, including removing the m.2 drive and only installing 1 SATA card. No matter what I do, I can not see any drives attached to any SATA controller on this board.

 

The UEFI screen is very stripper and does not have a section to see installed peripherals, so I can't even confirm that the card is recognized by the system. When the system boots, I do see a ton of errors related to ATA, so I'm not sure if my issue is at the bios level, or if there is something up with the UNRAID configs.

 

I did pull a diagnostic dump and attached it to this post.

 

Any help is appreciated.

 

 

storage-diagnostics-20211009-0128.zip

[JorgeB]

Marvell controllers are not recommend, they have various kwonn issues, you can try disabling iommu if you don't need it to see if it helps.