Joshndroid Posted October 9, 2021 Share Posted October 9, 2021 Hey All, I have finally bitten the bullet and grabbed an LSI card. The final straw has been some errors popping up within unraid console that appears to hamper the drives from mounting properly some boots. I know I should have grabbed one before I started but here I am. I have a 2 port sata card with 2 drives installed on it. I will be moving to a LSI SAS HBA (IT Mode) card which has 2 ports and 2x4way splitter cables. My question is - Is there any tips for moving across from the sata card to the LSI card? Is it possible to yank the disks, put the card in, replug and away I go? The alternative is do the above and rely on the dual parity to get me back to where I was? Cheers Quote Link to comment
JorgeB Posted October 9, 2021 Share Posted October 9, 2021 3 minutes ago, Joshndroid said: Is it possible to yank the disks, put the card in, replug and away I go? That's all you need to do. 1 Quote Link to comment
Joshndroid Posted October 9, 2021 Author Share Posted October 9, 2021 1 hour ago, JorgeB said: That's all you need to do. Legend. Thanks for that. I didn't want to do that exact thing and nuke my stuff if i didn't have too. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.