October 11, 20214 yr I Noticed that some of the shares was gone and browsed to the GUI and shares. Only cache disk shares are visible and raid shares are gone. I checked the logs and there was a lot of disk errors. My heart stopped beating and I figured I have some major problems. Do I really have issues with 6 of the disks or what might be the problem here? Could it be one of my SATA controller cards that broke down? If someone could have a look and figure out what my issues are I would be very thankful. //ChristerB tower-diagnostics-20211011-0228.zip Edited October 11, 20214 yr by ChristerB
October 11, 20214 yr Community Expert One of the LSI HBAs dropped: Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: sending diag reset !! Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: diag reset: FAILED Oct 10 22:14:26 Tower kernel: iommu: Removing device 0000:03:00.0 from group 19 Check that it's well seated and sufficiently cooled, you can also try a different PICe slot if available.
October 11, 20214 yr Author 2 hours ago, JorgeB said: One of the LSI HBAs dropped: Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: sending diag reset !! Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: diag reset: FAILED Oct 10 22:14:26 Tower kernel: iommu: Removing device 0000:03:00.0 from group 19 Check that it's well seated and sufficiently cooled, you can also try a different PICe slot if available. Thank you @JorgeB, after I cooled down I actually understood what the log file told me. I will check the card but I haven't touched the server for weeks and it should be well seated and cooled. Any idea on a good replacement card if it is broken. (I'll read through the recommendations that already exists on this forum) //ChristerB Edited October 11, 20214 yr by ChristerB
October 11, 20214 yr 1 hour ago, ChristerB said: Any idea on a good replacement card if it is broken. (I'll read through the recommendations that already exists on this forum) You can check this :
October 20, 20214 yr Author So, it seemed to be a heating issue (I had put the fans on low and forgot to put it back on full). Main problem solved and I will open a new topic on potential disk errors.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.