Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[Solved-sort of] Network problems after new PSU install

Featured Replies

I've had unRAID 4.7 working great for the last few weeks.  After installing a new PSU I can no longer get a network connection.  Have tried multiple cables, some known working with other machines, tried using a static IP and DHCP and no luck.  Here's my hardware and syslog attached.

Antec 900

Biostar TH55 HD

Intel Core i3-550 Clarkdale

Kingston ValueRAM 2GB 240-PIN DDR3 SDRAM DDR3 1333

Corsair Builder Series CX430

6 hard drives - WD/Seagate mix

syslog.txt

from the biostar website his board has a

Realtek RTL8111DL - 10/100/1000 Controller

 

from your syslog

Apr  1 21:19:11 CruzunRAID kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

Apr  1 21:19:11 CruzunRAID kernel: r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

Apr  1 21:19:11 CruzunRAID kernel: r8169 0000:02:00.0: setting latency timer to 64

Apr  1 21:19:11 CruzunRAID kernel: r8169 0000:02:00.0: irq 27 for MSI/MSI-X

Apr  1 21:19:11 CruzunRAID kernel: eth0: RTL8168d/8111d at 0xf822a000, 00:30:67:5a:40:1c, XID 081000c0 IRQ 27

 

unraid uses the right driver

 

Apr  1 21:19:11 CruzunRAID ifplugd(eth0)[1487]: ifplugd 0.28 initializing.

Apr  1 21:19:11 CruzunRAID kernel: r8169: eth0: link down

Apr  1 21:19:11 CruzunRAID ifplugd(eth0)[1487]: Using interface eth0/00:30:67:5A:40:1C with driver <r8169> (version: 2.3LK-NAPI)

Apr  1 21:19:11 CruzunRAID ifplugd(eth0)[1487]: Using detection mode: SIOCETHTOOL

Apr  1 21:19:11 CruzunRAID ifplugd(eth0)[1487]: Initialization complete, link beat not detected.

 

but for some reason your eth0 is not detecting an uplink

did you try another port in your router ?

restart router ?

 

 

  • Author

Well, after trying every combination I could think of I've got it working, turns out for whatever reason when the server was behind a switch (both a Trendnet TEG-S80g and a  DGS-2208) that I couldn't get a connection, if connected straight to my router (Linksys WRT350N) it worked fine.  Still no idea what the problem was and if you have any insight, let me know but I'm just happy it's working and wasn't too much of a pain in the B.  Thanks for your help sacretagent.

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.