October 13, 20214 yr 2 ssd drives are recognized (hooked up to SATA port on MB) (1 has crc error) tried switching wires tried replacing errored ssds wire everything is connected firmly 14TB drive for parity is recognized 3 8TB drives are not recognized All HDD's are connected with 9211-8i sas controller. I have 2 hba cards hooked up to mb and have tried the other ports and it still doesn't work Card bought from ebay and said IT mode and it says IT mode on bios boot screen I attached the log. Any help someone can give is appreciated. skynet-diagnostics-20211013-1142.zip
October 13, 20214 yr 6 minutes ago, Jasonunraid said: 14TB drive for parity is recognized 3 8TB drives are not recognized All HDD's are connected with 9211-8i sas controller. Are these all on the same breakout cable?
October 13, 20214 yr Author 1 breakout cable for the 14tb (so when i add my other 14tb drives they are together) 1 breakout cable for the other 3 hd's Edited October 13, 20214 yr by Jasonunraid
October 13, 20214 yr Also make sure it's not the 3.3v pin issue, see if the disks are spinning up, or check if they are detected in the onboard SATA.
October 13, 20214 yr Author so yeah, the 3 arent't spinning. They are shucked drives but they all came out of a working synology just fine
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.