Jasonunraid Posted October 13, 2021 Share Posted October 13, 2021 2 ssd drives are recognized (hooked up to SATA port on MB) (1 has crc error) tried switching wires tried replacing errored ssds wire everything is connected firmly 14TB drive for parity is recognized 3 8TB drives are not recognized All HDD's are connected with 9211-8i sas controller. I have 2 hba cards hooked up to mb and have tried the other ports and it still doesn't work Card bought from ebay and said IT mode and it says IT mode on bios boot screen I attached the log. Any help someone can give is appreciated. skynet-diagnostics-20211013-1142.zip Quote Link to comment
trurl Posted October 13, 2021 Share Posted October 13, 2021 6 minutes ago, Jasonunraid said: 14TB drive for parity is recognized 3 8TB drives are not recognized All HDD's are connected with 9211-8i sas controller. Are these all on the same breakout cable? Quote Link to comment
Jasonunraid Posted October 13, 2021 Author Share Posted October 13, 2021 (edited) 1 breakout cable for the 14tb (so when i add my other 14tb drives they are together) 1 breakout cable for the other 3 hd's Edited October 13, 2021 by Jasonunraid Quote Link to comment
trurl Posted October 13, 2021 Share Posted October 13, 2021 Are you sure you have the right breakout cable for the other 3? Quote Link to comment
Jasonunraid Posted October 13, 2021 Author Share Posted October 13, 2021 I bought 3 of the same ones. They are forward. Quote Link to comment
Jasonunraid Posted October 13, 2021 Author Share Posted October 13, 2021 I can try the other cable and see what happens Quote Link to comment
JorgeB Posted October 13, 2021 Share Posted October 13, 2021 Also make sure it's not the 3.3v pin issue, see if the disks are spinning up, or check if they are detected in the onboard SATA. Quote Link to comment
Jasonunraid Posted October 13, 2021 Author Share Posted October 13, 2021 so yeah, the 3 arent't spinning. They are shucked drives but they all came out of a working synology just fine Quote Link to comment
JorgeB Posted October 13, 2021 Share Posted October 13, 2021 Google "wd 3.3v sata pin" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.