Lawllipops Posted November 7, 2021 Share Posted November 7, 2021 (edited) Hi, so I had my unraid server running for about a year and finally upgraded it. new case, new cpu, new ram, and added more drives. I a, able to boot up and get everything running, but after sometime unraid gets disconnected. Can’t access my dockers or locally accessing my unraid machine. I check my router and I still see the machine is connected, but can’t access. eventually end up having to hard reset my machine. I added my diagnostics and hopefully someone can tell me what’s wrong. it also usually happens when I am doing something. Like copying a file from my share or starting a docker container. thehans-diagnostics-20211107-0829.zip Edited November 7, 2021 by Lawllipops upload new files Quote Link to comment
JorgeB Posted November 7, 2021 Share Posted November 7, 2021 Can't open the diags, you should also enable syslog server and post that after a crash, together with new diags. Quote Link to comment
Lawllipops Posted November 7, 2021 Author Share Posted November 7, 2021 Hi JorgeB, sorry for some reason when i tried to download my diagnostic it had an issue on my ipad. i tried from my desktop and attached them there. Quote Link to comment
Lawllipops Posted November 7, 2021 Author Share Posted November 7, 2021 i attached my system logs as well dont know if it will help but this is the mobo i got. https://www.amazon.com/dp/B08WCCGBH9?psc=1&ref=ppx_yo2_dt_b_product_details it has a 2.5gb lan port, but ive been reading that maybe i should downgrade to a 1GB card? thehans-syslog-20211107-1634.zip Quote Link to comment
trurl Posted November 7, 2021 Share Posted November 7, 2021 14 minutes ago, Lawllipops said: i attached my system logs as well syslog is in RAM like the rest of the OS and so doesn't survive reboot. syslog since the last reboot is already included in the diagnostics. Only syslogs saved by syslog server have anything from before reboot. Quote Link to comment
Lawllipops Posted November 7, 2021 Author Share Posted November 7, 2021 got it sorry. i attached my syslogs here as well as another diagnostic file since it disconnected again. syslog thehans-diagnostics-20211107-0948.zip Quote Link to comment
trurl Posted November 7, 2021 Share Posted November 7, 2021 Those diagnostics seem to be from before reboot and the syslog from after reboot. Are you sure that is the syslog from syslog server? Normally that would include entries from before and after reboot. Quote Link to comment
Lawllipops Posted November 7, 2021 Author Share Posted November 7, 2021 Ah. I got the diag files after my server crashed and I booted back up. I setup the syslog to from the instructions but I restarted my system in a clean restart and when my system booted back up I got the syslog. I will try pulling the logs and diag again once my system crashes again Quote Link to comment
Lawllipops Posted November 13, 2021 Author Share Posted November 13, 2021 I had my system crash again, and was able to pull the logs for my diagnostic and for my syslog. syslog thehans-diagnostics-20211112-1805.zip Quote Link to comment
JorgeB Posted November 13, 2021 Share Posted November 13, 2021 Unfortunately there's nothing relevant logged before the crash, this usually points to a hardware issue. Quote Link to comment
Lawllipops Posted November 13, 2021 Author Share Posted November 13, 2021 Hmm dang I got new ram, cpu, and motherboard. I think it might be my onboard lan. It’s. 2.5ghz port but for some reason I lose remote connection to my system. But my computer is still on. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.