November 12, 20214 yr Just got some errors. Not sure how serious or how to read the log. Any ideas? This drive is relatively new, and was my parity drive previously before I just upgraded to 14TB parity drives over the last 3 months or so. Additionally, my server has 900-1000W redundant PSUs. Any idea what caused this? Any additional info I can provide? tower-diagnostics-20211112-1555.zip
November 13, 20214 yr 197 Current_Pending_Sector -O--C- 088 088 000 - 4072 198 Offline_Uncorrectable ----C- 088 088 000 - 4072 Run an extended SMART test on the disk
November 13, 20214 yr Author 4 hours ago, trurl said: 197 Current_Pending_Sector -O--C- 088 088 000 - 4072 198 Offline_Uncorrectable ----C- 088 088 000 - 4072 Run an extended SMART test on the disk I think it's disconnected somehow? Smartctl open device: /dev/sdt failed: No such device I ran a smart test and it gave me that. Do I need to reseat the drive or am I out of power to run this? 20 drives, 2 SSDs, dual Xeons, all on 900-1000W server PSU?
November 13, 20214 yr Author 12 hours ago, JorgeB said: Try again after a power cycle. Shouldn't I reseat the drive or not necessary?
November 14, 20214 yr Author 7 hours ago, JorgeB said: Do it if it still doesn't come up after a power cycle. Trying now Just further info, I have a 500GB HDD that is VERY old in my system, it used to show up and now doesn't. It could have just died (I've transported the HDD a lot in boxes of junk and it's jostled around quite a bit), but maybe something is wrong with my backplane? I finished the reboot and SMART report. It ran without needing a reseat. Here it is attached. Drive is still being emulated currently. tower-smart-20211114-0420.zip Edited November 14, 20214 yr by tential
November 14, 20214 yr On 11/12/2021 at 8:35 PM, trurl said: Run an extended SMART test on the disk That one didn't complete. You will have to disable spindown on the disk to get it to complete.
November 15, 20214 yr Author 5 hours ago, trurl said: That one didn't complete. You will have to disable spindown on the disk to get it to complete. It stayed stuck at 10% last time before showing complete. I disabled spindown and spun up the drive and still, same thing. Looks like I need to reseat the drive? Edit: It's saying errors occurred, check Smart report this time. I've attached it. tower-smart-20211114-1323.zip Edited November 15, 20214 yr by tential
November 20, 20214 yr Author On 11/15/2021 at 1:51 AM, JorgeB said: Test failed, disk should be replaced. Is there any chance the actual port is bad and could fry a new drive? When I took the drive out to reseat it, I saw a huge piece of lint(Piece of my sweatpants) somehow was logged there. No idea how this happened. It's been my parity drive for a long while now, so I can't understand how that happened. Also had a mouse in my place and see evidence the mouse was around my server (Gross, very sad). Just wondering since my 500GB drive doesn't show up anymore as well, but I'm guessing that was also on its last legs and died too. It was quite old and I stored it in a huge box of junk that I've moved a lot of times, without care to the 500GB drive, since I didn't think it even worked, but it did. Too bad I didn't salvage the data. Edited November 20, 20214 yr by tential
November 20, 20214 yr 6 hours ago, tential said: Is there any chance the actual port is bad and could fry a new drive? No, though bad power can damage a drive.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.