Jump to content

HDD can't be mounted


Recommended Posts

Posted (edited)

Hello, I tried to put from my old PC the HDD in the server to transfer the data to my array and then make him a part of the array but I am running in this error when I try to mount it from 'Unassigned Devices'.

Nov 13 23:57:16 BlazeServer unassigned.devices: Adding disk '/dev/sde1'...
Nov 13 23:57:16 BlazeServer unassigned.devices: Mounting partition '/dev/sde1' at mountpoint '/mnt/disks/Caviar_Black'...
Nov 13 23:57:16 BlazeServer unassigned.devices: Mount drive command: /sbin/mount -t 'ntfs' -o rw,noatime,nodiratime,nodev,nosuid,nls=utf8,umask=000 '/dev/sde1' '/mnt/disks/Caviar_Black'
Nov 13 23:57:16 BlazeServer unassigned.devices: Mount of '/dev/sde1' failed: '$MFTMirr does not match $MFT (record 3). Failed to mount '/dev/sde1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. '
Nov 13 23:58:18 BlazeServer unassigned.devices: Adding disk '/dev/sde1'...
Nov 13 23:58:18 BlazeServer unassigned.devices: Mounting partition '/dev/sde1' at mountpoint '/mnt/disks/fasthdd'...
Nov 13 23:58:18 BlazeServer unassigned.devices: Mount drive command: /sbin/mount -t 'ntfs' -o rw,noatime,nodiratime,nodev,nosuid,nls=utf8,umask=000 '/dev/sde1' '/mnt/disks/fasthdd'
Nov 13 23:58:18 BlazeServer unassigned.devices: Mount of '/dev/sde1' failed: '$MFTMirr does not match $MFT (record 3). Failed to mount '/dev/sde1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. '

 

Any ideas ?

Edited by Nick Antoniadis
Posted
28 minutes ago, Nick Antoniadis said:

Any ideas ?

Ask on the Unassigned Devices support thread and post your diagnostics there.

 

You can go directly to the correct support thread for any of your plugins by clicking its Support Thread link on the Plugins page of your webUI.

  • Like 1
  • trurl locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...