here is the latest problem, ANYONE know what caused this or how i can remotly fix? i have ILO access, (IBM is IMM)  I can load a linux distro through Virtual Drive to get access to the flash drive. is there a file i need to delete or replace? i do have a second server running on same network.

 

Thanks

replace all the bz files on the flashdrive with fresh files from https://unraid.net/download

16 minutes ago, ChatNoir said:

replace all the bz files on the flashdrive with fresh files from https://unraid.net/download

I am running the updated Ver. 6.10 RC2 i guess i could take them from my other raid pro system running the same.. would that work or would they be modified?

 

7 minutes ago, Wiseone001 said:

am running the updated Ver. 6.10 RC2 i guess i could take them from my other raid pro system running the same.. would that work or would they be modified?

 

The bz* are strictly archive files from the download.  When Unraid boots up, it extracts the needed files from those achieves  to build the Unraid OS installation on a RAM disk.  (Thinking of it another way, each time Unraid boots up, it does a completely new install of the entire system using those bz* files.) 

Edited November 19, 20214 yr by Frank1940

58 minutes ago, Wiseone001 said:

I am running the updated Ver. 6.10 RC2 i guess i could take them from my other raid pro system running the same.. would that work or would they be modified?

That should work.

From your screenshot, it seems that one of the bzfile is corrupted and does not match the expected checksum.

If your other system boots and works file, the files on the flashdrive should be fine.

On 11/19/2021 at 9:28 AM, ChatNoir said:

That should work.

From your screenshot, it seems that one of the bzfile is corrupted and does not match the expected checksum.

If your other system boots and works file, the files on the flashdrive should be fine.

That is what i did as the files for the 6.9 installer were different. 

It is back up and running.

Thanks