subye Posted November 23, 2021 Share Posted November 23, 2021 (edited) I configured my router with a VPN service so that all the traffic will be through the router with an external IP address that match my VPN server. But the problem with this is the unraid read the incorrect WAN IPv4 address, which is not ISP address but the VPN server address. I set up the port forwarding in the router, yet it shows server unreachable. How can I fix this? The attached picture shows the IP address of the VPN server. I can access 10.10.10.10:443/Main But Cannot access MY Real IP address:Port that is forwarding to 443 Also the port is open outside my local network. Edited November 23, 2021 by subye Link to comment
ljm42 Posted November 23, 2021 Share Posted November 23, 2021 Probably your best bet would be to configure the router so that the Unraid server doesn't use the VPN. The other option would be to configure your VPN service so that it does the port forwarding rather than your router. Link to comment
subye Posted November 24, 2021 Author Share Posted November 24, 2021 (edited) 7 hours ago, ljm42 said: Probably your best bet would be to configure the router so that the Unraid server doesn't use the VPN. The other option would be to configure your VPN service so that it does the port forwarding rather than your router. Hi, Thanks for offering help. I have disabled VPN on router and passed the test. But still cannot access remotely. Edited November 24, 2021 by subye Link to comment
subye Posted November 24, 2021 Author Share Posted November 24, 2021 problem solved. I set up prot-F on VPN server Link to comment
ljm42 Posted November 30, 2021 Share Posted November 30, 2021 I noticed your screenshot says "Local access". To change that to "Remote access", you need to be on a different network than the server (or more exactly, you need to have a different WAN IP than the server does). Then the dashboard will offer you the Remote access link. Link to comment
Recommended Posts