phoebus Posted November 24, 2021 Share Posted November 24, 2021 (edited) Due to recent hardware network issues I'd like my eth1 (motherboard network) to serve as a backup to my main network connection eth0 (NIC) and can't seem to get it right. I've assigned my Unraid a static IP locally to help with bookmarks etc. But when I disconnect the eth0 cable I can never connect. I've looked but can't seem to find the settings I need to change. Any advice welcome. Edited November 25, 2021 by phoebus Problem emerged Quote Link to comment
SimonF Posted November 24, 2021 Share Posted November 24, 2021 Add eth1 to bonding members on eth0 Quote Link to comment
phoebus Posted November 24, 2021 Author Share Posted November 24, 2021 Amazing, thank you Quote Link to comment
phoebus Posted November 25, 2021 Author Share Posted November 25, 2021 Okay so despite adding eth1 to bonding members eth0 I still have been losing my internet connection. I have also upgraded to the latest Unraid Beta. I keep getting Nov 25 22:16:03 Unraid kernel: r8169 0000:03:00.0 eth1: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100). Nov 25 22:16:14 Unraid kernel: r8169 0000:03:00.0 eth1: rtl_txcfg_empty_cond == 0 (loop: 42, delay: 100). r8169 is eth1 so I thought that if eth0 is fine it should be okay. It always seems to happen around 9pm at night, I'd been using it all day. And when I reopen my laptop where I'm logged into my Unraid dashboard and/or the Windows VM running on it it tends to, but not always, fix itself. The Intel NIC seemed to be okay but after an error I thought that bonding the flakey r8169 motherboard device to eth0 it would mean that if one fell out then the other would kick in and I'd have a stable connection. Any thoughts? unraid-diagnostics-20211125-2216.zip Quote Link to comment
phoebus Posted November 26, 2021 Author Share Posted November 26, 2021 Okay so the mystery deepens as now I am getting spammed by these messgaes several times per minute Nov 26 18:05:35 Unraid kernel: bond0: (slave eth0): link status definitely up, 1000 Mbps full duplex Nov 26 18:05:35 Unraid kernel: bond0: (slave eth0): making interface the new active one Nov 26 18:05:35 Unraid kernel: device eth0 entered promiscuous mode Nov 26 18:05:35 Unraid kernel: bond0: active interface up! Nov 26 18:05:35 Unraid kernel: br0: port 1(bond0) entered blocking state Nov 26 18:05:35 Unraid kernel: br0: port 1(bond0) entered forwarding state Nov 26 18:06:07 Unraid kernel: e1000e 0000:05:00.0 eth0: Reset adapter unexpectedly Nov 26 18:06:07 Unraid kernel: bond0: (slave eth0): link status definitely down, disabling slave Nov 26 18:06:07 Unraid kernel: device eth0 left promiscuous mode Nov 26 18:06:07 Unraid kernel: bond0: now running without any active interface! Nov 26 18:06:07 Unraid kernel: br0: port 1(bond0) entered disabled state Nov 26 18:06:11 Unraid kernel: e1000e 0000:05:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.