I've tried to find answers to what this is but I can't find anything on it.

 

I have an R720xd with almost all SAS drives including my cache drive. I'm not sure its an actual error but I'd like to know what it is.

 

Nov 29 17:06:13 Unraid kernel: sd 1:0:8:0: [sdj] tag#1375 Sense Key : 0x1 [current] 
Nov 29 17:06:13 Unraid kernel: sd 1:0:8:0: [sdj] tag#1375 ASC=0x1c ASCQ=0x2 
Nov 29 17:36:35 Unraid kernel: sd 1:0:8:0: [sdj] tag#1427 Sense Key : 0x1 [current] 
Nov 29 17:36:35 Unraid kernel: sd 1:0:8:0: [sdj] tag#1427 ASC=0x1c ASCQ=0x2 
Nov 29 18:06:57 Unraid kernel: sd 1:0:8:0: [sdj] tag#1447 Sense Key : 0x1 [current] 
Nov 29 18:06:57 Unraid kernel: sd 1:0:8:0: [sdj] tag#1447 ASC=0x1c ASCQ=0x2 
Nov 29 18:37:19 Unraid kernel: sd 1:0:8:0: [sdj] tag#1524 Sense Key : 0x1 [current] 
Nov 29 18:37:19 Unraid kernel: sd 1:0:8:0: [sdj] tag#1524 ASC=0x1c ASCQ=0x2 
Nov 29 19:07:42 Unraid kernel: sd 1:0:8:0: [sdj] tag#1414 Sense Key : 0x1 [current] 
Nov 29 19:07:42 Unraid kernel: sd 1:0:8:0: [sdj] tag#1414 ASC=0x1c ASCQ=0x2 
Nov 29 19:38:04 Unraid kernel: sd 1:0:8:0: [sdj] tag#1475 Sense Key : 0x1 [current] 
Nov 29 19:38:04 Unraid kernel: sd 1:0:8:0: [sdj] tag#1475 ASC=0x1c ASCQ=0x2 
Nov 29 20:08:26 Unraid kernel: sd 1:0:8:0: [sdj] tag#1486 Sense Key : 0x1 [current] 
Nov 29 20:08:26 Unraid kernel: sd 1:0:8:0: [sdj] tag#1486 ASC=0x1c ASCQ=0x2 
Nov 29 20:38:48 Unraid kernel: sd 1:0:8:0: [sdj] tag#1514 Sense Key : 0x1 [current] 
Nov 29 20:38:48 Unraid kernel: sd 1:0:8:0: [sdj] tag#1514 ASC=0x1c ASCQ=0x2 
 

unraid-diagnostics-20211129-2208.zip

Nobody?

Also running a 720xd, and getting this on a bunch of the SAS SSDs.  Any ideas as to what it is or how to resolve it?

Same situation over here, recently installed a couple of SAS SSDs as Cache pool in RAID in my unRaid, and started getting these messages every 5 seconds. I have SAS HDDs but connected to the same RAID card and they don't trigger these messages.

 

Noticed that when I run: `smarctl -A /dev/sdX` in any of the two devices, it trigger the message too.

 

Any ideas?

Also looking to shed some light on this issue! SAS SSD LB206M Drives are what started spamming it (they are not in any pools yet. I just have them sitting in unassigned devices). Is there firmware i should be updating on the drives? Quick Google-fu seems to point to a SMART issue for reading the drive? Any help would be great before i put these into production and flood my LOG with stuff.