Unraid Upgrade no VM working anymore

Hello,

I upgraded my hardware from an r7 2700X to an R9 5900X. Now all of my VMs are broken. The Linux VMs starts in grub and if I press Enter on "Ubuntu" I get a black screen. My Win10 VM shows on the top left a cursor for 0,1 sec and after that it shows the Tiano Core Logo. This will repeat in an infinit Loop.

I recreated the VMs with no luck.

My main VM is on an NVME SSD over PCI passthrough and I can boot directly from the server, so the SSD is working.

Log:

-cpu host,migratable=on,topoext=on,host-cache-info=on,l3-cache=off \
-m 20992 \
-overcommit mem-lock=off \
-smp 12,sockets=1,dies=1,cores=6,threads=2 \
-uuid 0b7c86a5-6e6c-cb66-23d5-86b057bd387f \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=32,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-boot strict=on \
-device pcie-root-port,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=0x11,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=0x12,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=0x14,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \
-netdev tap,fd=35,id=hostnet0 \
-device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:87:48:30,bus=pci.1,addr=0x0 \
-chardev pty,id=charserial0 \
-device isa-serial,chardev=charserial0,id=serial0 \
-chardev socket,id=charchannel0,fd=36,server,nowait \
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \
-device usb-tablet,id=input0,bus=usb.0,port=1 \
-vnc 0.0.0.0:1,websocket=5701 \
-k de \
-device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pcie.0,addr=0x1 \
-device vfio-pci,host=0000:01:00.0,id=hostdev0,bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2021-12-22 19:21:40.760+0000: Domain id=11 is tainted: high-privileges
2021-12-22 19:21:40.760+0000: Domain id=11 is tainted: host-cpu
char device redirected to /dev/pts/2 (label charserial0)

Best Wishes

Tjard

PS: My Backup vDisk are also not working and i got a new board (from b450 to b550). At the first boot I got some problems with my sata Controller but now the array is working.

Edited December 22, 20214 yr by tjard13