UNRAID系统关闭后,无法切断电源


Go to solution Solved by lyqalex,

Recommended Posts

系统关闭后无法电源无法彻底切断,硬盘灯还是亮着的,不管是系统主界面内的关机按钮还是命令shutdown,都无法彻底关闭电源。

处理不干净的关闭 - 一般支持 - Unraid- 根据这个帖子的提示把VM、管理器 docker、磁盘管理的计时器调整后问题依旧。

nas-diagnostics-20211224-0731.7z

Edited by cherishtoby
Link to comment
  • cherishtoby changed the title to UNRAID系统关闭后,无法切断电源
  • Solution

我看了下你的配置文件,建议先停用一些设置,最好是初始化,停用如i915驱动设置、wol等设置进行测试能否正常关机。

Ps:不能正常关机,好多时候是因为docker或者vms不能响应系统发出关机指令自动关闭各自系统,进入假死。代表是openwrt、群晖等等。

  • Thanks 1
Link to comment

感谢回复,停用I915之后问题消失了。可以正常关机了,功耗恢复正常;

但是新的问题又来了,只要我启用了硬解,就没办法正常关机断电。不管是通过修改配置文件代码还是安装“Intel GPU TOP”,都无法彻底断电。

我用的CPU是11900T,会不会跟CPU有关?另外我用的是ES版本的CPU。

Edited by cherishtoby
Link to comment

这次故障极有可能是因为es处理器的问题。es很难推测是哪个时期或阶段的工程样本,bug多少或者是哪种bug无法预知,所以很讲究手气,并且主板方面也可能有不兼容现象。qs则很接近正式版,但建议都不要采用。可以更换cpu测试一下。

  • Thanks 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.