Big Wig Posted January 1, 2022 Share Posted January 1, 2022 (edited) My Unraid server was damaged (blown out window with rain water) in Hurricane Ida so I have rebuilt a new one but have an issue on boot. It should be noted that I am using the old thumb drive along with the original drives. On bootup the new Lsi controller is showing the drives so I assume they were not damaged. I have attached a picture of what it is showing at boot. Any help or if you can point me in any direction it would be appreciated. New Build: Processor: Threadripper Pro 3955WX Motherboard: Asus Sage WS WRX80E SAS Controller: LSI 9201-16i 6G 16P SAS HBA P19 IT Mode RAM: 8 GB Kingston ECC Installed from the old server (128GB Should be in Next Week) Power: EVGA SuperNOVA 220-P2-1200-X1 Case: Rosewill RSV-L4412U 4U Server Chassis Rackmount Case Cooler: Ice Giant Pro Elite VGA: RX580 (From old machine) HDD: 8 Various SDD: 2-2TB M2: 1-2TB Many Thanks, Edited January 1, 2022 by Big Wig Quote Link to comment
JorgeB Posted January 1, 2022 Share Posted January 1, 2022 That's usually a flash drive issue, try redoing it, this can also help sometimes: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=713741 Quote Link to comment
Big Wig Posted January 1, 2022 Author Share Posted January 1, 2022 Downloaded backup form community Backup and created a new Thumb Drive. TYVM Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.